softing-LOGO

softing smartLink SW-PN Profinet Access Point Asset Management

softing-smartLink-SW-PN-Profinet-Access-Point-Asset-Management-PRODUCT

smartLink SW-PN
Access PROFINET networks via FDI and OPC UA

  • Access to PROFINET networks is independent of the controller
  • Integration without interference with the operation of existing installations
  • Connect to PROFINET and PROFIBUS devices
  • Compatible with products of leading device manufacturers

softing-smartLink-SW-PN-Profinet-Access-Point-Asset-Management-PRODUCT

Parameterization and Asset Management

  • Independent of PROFINET engineering tools
  • Centralized and time-saving asset management of PROFINET networks with PROFINET and PROFIBUS field devices directly from the control room

Ethernet Access Point to PROFINET networks

  • Provides 2nd channel to access the field devices
  • Acts as a PROFINET supervisor
  • Support of multiple PROFINET networks
  • Needs only standard Ethernet (UDP) connection to the PROFINET networks

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFINET networks without requiring modification
  • Access to acyclic data via FDI communication server (OPC UA)

Asset Management and Parameterization of PROFINET Devices

softing-smartLink-SW-PN-Profinet-Access-Point-Asset-Management-FIG-1

Parameterization and Asset Management

  • Secure, standardized access to devices
  • Parallel to and independent of the controller

Compatible with established communication standards

Implements the standard FDI communication server interface based on OPC UA

Asset Management and Parameterization of PROFIBUS Devices

softing-smartLink-SW-PN-Profinet-Access-Point-Asset-Management-FIG-2

Parameterization and Asset Management

  • Secure, standardized access to devices
  • Parallel to and independent of the controller

Inexpensive and low-risk integration

  • Connection of PROFIBUS devices without additional hardware
  • Use of existing infrastructure using the PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices

Compatible with established communication standards

Implements the standard FDI communication server interface based on OPC UA

smartLink SW-PN

softing-smartLink-SW-PN-Profinet-Access-Point-Asset-Management-FIG-4

softing-smartLink-SW-PN-Profinet-Access-Point-Asset-Management-FIG-3

CONTACT

http://industrial.softing.com

Technical changes reserved © Softing Industrial Automation GmbH, smartLink_SW-PN_D-3S_EN_240717_110, July 2024

Documents / Resources

softing smartLink SW-PN Profinet Access Point Asset Management [pdf] Owner's Manual
SW-PN_D-3S, SW-PN_EN_240717_110, smartLink SW-PN Profinet Access Point Asset Management, smartLink SW-PN, Profinet Access Point Asset Management, Access Point Asset Management, Point Asset Management, Asset Management, Management

References

Leave a comment

Your email address will not be published. Required fields are marked *