softing-LOGO

softening SW-PN Profinet Access Point Asset Management

softing-SW-PN-Profinet-Access-Point-Asset-Management-PRODUCT

PROFINET Access Point for Asset Management

  • Access to PROFINET networks independent from the controller
  • Integration without interference with the operation of existing installations
  • Connect to PROFINET and PROFIBUS devices
  • Compatible with products of leading device manufacturerssofting-SW-PN-Profinet-Access-Point-Asset-Management-FIG- (1)

Parameterization, Plant Asset Management and Process

  • Data Provision using Standard Industry Tools
  • Independent of configuration tools
  • Centralized and time-saving parameterization of
  • PROFINET and PROFIBUS field devices directly from the control room
  • Access from Plant Asset Management applications for field device configuration
  • Ethernet Access Point to PROFINET networks
  • Provides 2nd channel to access the field devices
  •  Acts as a PROFINET supervisor
  •  Support of multiple PROFINET networks
  •  Needs only a standard Ethernet (UDP) connection to the PROFINET networks
  • Key Component for Transition to State-of-the-Art Technology
  • Re-use of existing PROFINET networks without requiring modification
  • Access to acyclic data via FDI communication server (OPC UA)

Asset Management and Parameterization of PROFINET Devices

softing-SW-PN-Profinet-Access-Point-Asset-Management-FIG- (2)

  • Configuration, Parameterization, Plant Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
  • Compatible with established communication standards
  • Implements the standard FDI communication in the server interface based on OPC UA
  • Configuration, Parameterization, Plant Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controllersofting-SW-PN-Profinet-Access-Point-Asset-Management-FIG- (3)
  • Inexpensive and low-risk Integration
  • Connection of PROFIBUS devices without additional hardware
  • Use of existing infrastructure using the
  • PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices
  • Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Technical Data

softing-SW-PN-Profinet-Access-Point-Asset-Management-FIG- (4)
Technical changes reserved © Softing Industrial Automation GmbH, smartLink_SW-PN_D-3S_EN_231212_100, December 2023

Documents / Resources

softing SW-PN Profinet Access Point Asset Management [pdf] Instruction Manual
SW-PN Profinet Access Point Asset Management, Profinet Access Point Asset Management, Point Asset Management, Asset Management, Management

References

Leave a comment

Your email address will not be published. Required fields are marked *