Socket Mobile D700 Barcode Scanner User Guide

Socket Mobile D700 Barcode Scanner

Product Specifications

• Charging Requirements: Min 5.0 VDC, 1 AMP Max 5.5 VDC, 3 AMPs
• Charging Time: Up to 8 hours for full charge
• Bluetooth Connection Modes: iOS Application Mode, Android/Windows Application Mode, Basic Keyboard Mode
• Warranty: Standard one-year limited warranty, 90-day warranty extension with registration

Connection Modes instructions

For best results, please follow instructions below:

Prior to first use – Fully charge your barcode reader

Use a wall charger to charge batteries until the battery light turns solid green (up to 8 hours).

Important: Do not charge Socket Mobile data readers in temperatures above 100°F/40°C, as the reader may not charge properly.
Charging from a computer or laptop USB port will not provide enough power and could cause charging, connection or scanning performance issues.

Download the Socket Mobile Companion app to set-up your barcode reader

Scan QR Code with your device to visit the Companion app download page, or go to https://sckt.tech/companion

Register your barcode reader with the Socket Mobile Companion app to activate a 90-day warranty extension

If the Companion app cannot be installed, pair your barcode reader directly to the host device.

1. On host device – turn off Bluetooth.
2. Power on the barcode reader.
3.  Select and scan a Bluetooth connection mode barcode (see following page).
4. On host device – turn Bluetooth back on and pair barcode reader.

You are now ready to start scanning!
For a complete user guide: https://sckt.tech/downloads

Need help?
Visit https://sckt.tech/support
For device set-up: https://sckt.tech/device-set-up

Bluetooth Connection Modes

Factory Reset

Revert all settings to factory defaults. The barcode reader will power off after scanning this barcode.

Add SocketCare extended warranty coverage:  https://sckt.tech/socketcare
Purchase SocketCare within 60 days from the date of purchase of the barcode reader.
Product Warranty: The barcode reader’s warranty period is one year from the date of purchase. Consumables such as batteries and charging cables have a limited warranty of 90 days. Extend your barcode reader’s standard one-year limited warranty coverage up to five years from the date of purchase. Additional service features are available to further enhance your warranty coverage:

• Warranty period extension only
• Express Replacement Service
• One-Time Accidental Coverage
• Premium Service

Environment
Socket Mobile is committed to combating global climate change. We back up this commitment with sensible, sustainable policies dedicated to achieving tangible results. Learn about the specifics of our environmental practices here: https://sckt.tech/recycling

Important Information – Safety, Compliance and Warranty

Safety and Handling

See Safety and Handling in the User Guide: https://sckt.tech/downloads

Regulatory Compliance

Regulatory information, certification and compliance marks specific to the Socket Mobile barcode scanner are available in Regulatory Compliance: https://sckt.tech/compliance_info

IC and FCC Compliance Statement
This device complies with Industry Canada license exempt RSS standard(s). This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may cause interference, and
2. This device must accept any interference, including interference that may cause undesired operations.

EU Compliance Statement
Socket Mobile hereby declares that this wireless device is in compliance with the essential requirements and other relevant provisions. Products intended for sale within the European Union are marked with a CE Mark, which indicates compliance to applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are included: Normes (EN), as follows:

CONFORMS TO THE FOLLOWING EUROPEAN DIRECTIVES

• Low Voltage Directives: 2014/35/EU
• RED Directive: 2014/53/EU
• EMC Directive: 2014/30/EU
• RoHS Directive: 2015/863
• WEEE Directive: 2012/19/EC

Battery and Power Supply
The barcode reader contains a rechargeable battery which may present a risk of fire or chemical burn if mistreated. Do not charge or use the unit in a car or similar place where the inside temperature may be over 60 degrees C or 140 degrees F.

Limited Warranty Summary

Socket Mobile Incorporated warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. Products must be purchased new from a Socket Mobile authorized distributor, reseller or from the SocketStore on Socket Mobile’s website: socketmobile.com. Used products and products purchased through non-authorized channels are not eligible for this warranty support. Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty.
For more warranty information: https://sckt.tech/socketcare

Frequently Asked Questions

• Q: Can I charge the barcode reader using a computer or laptop USB port?
  A: Charging from a computer or laptop USB port may not provide  enough power and could cause charging, connection, or scanning performance issues. It is recommended to use a wall charger.
• Q: How can I revert all settings to factory defaults?
  A: To perform a factory reset, scan the Factory Reset barcode. The barcode reader will power off after scanning this code.