SD Card Recording Configuration for Cameras

SD Card Recording Configuration
This manual refers to Zintronic® ‘B’ & ‘D’ product series.

I. SD Card and record configuration for cameras.

• SD Card formatting.

1. Go into ‘Configuration’.
2. Click on ‘Storage’>’Storage management’.
3. Check the box on the left side where the status says ‘Unformat’ and shows SD Card capacity.
4. After checking box, click on ‘Format’.
5. After a while card is formatted.
6. Click on ‘Save’ button.

• Continous recording configuration.

1. Go to ‘Plan configuration’.
2. Check ‘Enable Record’ box.
3. Click on ‘Select All’.
4. Click the ‘Save’ button.

• Alarm recording configuration.

1. Go to ‘Plan configuration’.
2. Check ‘Enable Record’ box.
3. In video type select ‘Motion detection’.
4. Click on ‘Select All’.
5. Click the ‘Save’ button.

• Motion detection configuration – to get camera to detect motion alarms, you need to set motion  detection as in the steps shown below in text manual and manual picture.

1. Go to ‘Configuration’.
2. Choose ‘Events’.
3. Choose ‘ Ordinary Event’.
4. Check the ‘Enable’ box.
5. Set area using mouse cursor.
6. Click ‘Save’.

Documents / Resources

Zintronic SD Card Recording Configuration for Cameras [pdf] Instructions SD Card Recording Configuration for Cameras, SD Card Recording Configuration

References

• User Manual