Instructions for Zintronic models including: SD Card Recording Configuration for Cameras, SD Card Recording Configuration

Jakub Sternik

How to set up recording to the SD Card?

BITVISION cameras

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 4 Pages, 459.30KB

Document Document

SD Card Recording Configuration
This manual refers to Zintronic® 'B' & 'D' product series.
Table of Contents:
Section I ­ SD Card and record configuration for cameras. · SD Card formatting............................................................................................... · Continous recording configuration........................................................................ · Alarm recording configuration............................................................................... · Motion detection configuration..............................................................................

I. SD Card and record configuration for cameras.
· SD Card formatting.
1. Go into 'Configuration'. 2. Click on 'Storage'>'Storage management'. 3. Check the box on the left side where the status says 'Unformat' and shows SD Card capacity. 4. After checking box, click on 'Format'. 5. After a while card is formatted. 6. Click on 'Save' button.
· Continous recording configuration.
1. Go to 'Plan configuration'. 2. Check 'Enable Record' box. 3. Click on 'Select All'. 4. Click the 'Save' button.

· Alarm recording configuration.
1. Go to 'Plan configuration'. 2. Check 'Enable Record' box. 3. In video type select 'Motion detection'. 4. Click on 'Select All'. 5. Click the 'Save' button.

· Motion detection configuration - to get camera to detect motion alarms, you need to set motion detection as in the steps shown below in text manual and manual picture.
1. Go to 'Configuration'. 2. Choose 'Events'. 3. Choose ' Ordinary Event'. 4. Check the 'Enable' box. 5. Set area using mouse cursor. 6. Click 'Save'.