ZALMAN N5 OF ATX MID Tower Computer Case User Manual
ZALMAN N5 OF ATX MID Tower Computer Case

To ensure safe and easy installation, please read the following precaution.
* Product design and specifications may be revised to improve quality and performance without notice.

www.zalman.com
QR code

Precautions

  • Read this manual carefully before installing.
  • Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
  • Wear gloves to prevent accidents when installing the product.
  • Severe damage may occur when mounting the system, so do not apply excessive force.
  • Connecting the cable incorrectly may cause a fire due to a short circuit.
    Make sure to refer to the manual when connecting the cable.
  • Be careful not to block the ventilation hole of the product when using the system.
  • Avoid locations with direct sunlight, water, moisture, oil, and excessive dust.
    Store and use the product in a well-ventilated location.
  • Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
  • Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
  • Store and use the product out of children’s reach.
  • Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
  • The exterior design and specifications of the product are

Specifications

Model N5 OF
Case Form Factor ATX Mid-Tower
Dimensions 437(D) x 200(W) x 450(H)mm
Weight 3.6kg
Case Materials Plastic, Steel
Motherboard Support ATX / mATX / Mini-ITX
Maximum VGA Length 365mm
Maximum CPU Cooler Height 158mm
Maximum PSU Length 160mm
PCI Expansion Slots 7
Drive Bays 2 x Combo(3.5” or 2.5”), 4 x 2.5” SSD, 1 x 5.25 ODD
Fan Support Top 3 x 120mm
Front 2 x 120mm
Rear 1 x 120mm
Bottom 2 x 120mm
Fan(s) Inclued Front 2 x 120mm (with White LED Effect)
Rear 1 x 120mm (with White LED Effect)
Radiator Support Front 120mm / 240mm
Rear 120mm
I/O Ports 1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0, Reset Button, Power Button, Fan-LED Controller  (Change Fan Speed & LED Brightness)

Specifications

Accessories

User’s Manual
Accessories

Buzzer
Accessories

Cable Ties x 5
Accessories

Thumm Screws x 2
Accessories

SSD / MB Screws x 20

PSU / HDD / VGA Screws x 8
Accessories

Motherboard Standoffs x 3
Accessories

I/O Ports

I/O Ports

# Part # Part # Part # Part
Power Button Fan Controller HDD / Power LED Headphone Jack
Microphone Jack USB 2.0 Ports USB 3.0 Port Reset Button

Removing the side panels

  1. Acrylic Panel
    Removing the side panels
  2. Steel Panel
    Removing the side panels

Removing the front panel

Removing the front panel

Mounting the motherboard

Mounting the motherboard

Motherboard size

※ Pick out the 8-Pin auxiliary power cable(CPU power connector) through the groove on top before installing motherboard.

  1. ATX
    Motherboard size
  2. mATX
    Motherboard size
  3. Mini-ITX
    Motherboard size

Mounting the PSU

Mounting the PSU

Mounting the PCI-E(VGA) card

Mounting the PCI-E(VGA) card

Mounting the 3.5″ and 2.5″ SSD / HDD

  1. HDD
    Mounting
    Screw HDD Screws
    Mounting
  2. SSD
    Mounting
    SSD / MB Screws
    Mounting

Mounting

Mounting the 2.5″ SSD / HDD

Mounting the 2.5" SSD / HDD
Mounting the 2.5" SSD / HDD

Mounting the 2.5" SSD / HDD
Mounting the 2.5" SSD / HDD

Mounting the 2.5" SSD / HDD
Mounting the 2.5" SSD / HDD

Mounting the fans

  1. Mounting the top fans
  2. Mounting the bottom fans
    Mounting the fans

Fan(s) Included

  1. Front : 2 x 120mm Fan
    • with White LED Effects
      Fan(s) Included
  2. Rear : 1 x 120mm Fan
    • with White LED Effects
      Fan(s) Included

Fan Controller

4 Control Modes of Fan speed & LED brightness

Mode Fan Speed LED Brightness
Mode 1. High High
Mode 2. Low Low
Mode 3. Low Off
Mode 4. Off Off

※ Caution: shutting off your system fans could cause increase of system temperature.

I/O Connectors

I/O Connectors

Product Warranty

product name

model name

date of purchase

Year//Month//Day Serial No.  

Where to buy

 

sale price

 
  1. Quality warranty period: 1 year from the date of purchase. (However, when there is a purchase receipt)
  2. Free A/S: In case of defects or defects in the product’s own performance within the warranty period.
  3. Paid A/S: When a problem occurs in using the product after the warranty period. However, free A/S processing is not available for the following matters even within the warranty period. It is handled at the consumer’s expense.
    1. If you do not follow the precautions and precautions before installation specified in this user manual.
    2. In case of deformation, damage/destruction due to the user’s intention, negligence or negligence.
    3. In case of deformation or malfunction due to user’s arbitrary modification.
    4. When the quality assurance sticker is removed or damaged.
    5. In case of malfunction due to natural disaster.
    6. In case of malfunction due to use in an abnormally humid environment or a space with a lot of dust and other foreign substances (worms, etc.).
  4. Parts retention period: 2 years from the date of product discontinuation (However, the time of discontinuation is based on the final shipment date of the discontinued product.)
  5. A/S information
    1. Operating Hours: Weekdays 10:00 ~ 16:00 (Closed on holidays, Saturdays and Sundays)
    2. How to apply
      1. Visit to: Visit www.zalmansvc.com and register for service
      2. Delivery by courier: After accessing www.zalmansvc.com and registering as a member, receive service application after entering your name, contact information and symptoms courier delivery prepaid
    3. Reception desk ※ After checking the exact location and address of the A/S center on the website, visit or send by courier.
  6. Product transportation cost
    1. In case of initial defect: In case of initial defect, the round-trip fare will be borne by us.
    2. In case of free A/S: In principle, the cost of courier delivery within the free period shall be borne by the customer once (prepaid).
    3. Paid A/S and after warranty period: All round-trip costs are borne by the customer.
  7. How to check the date of manufacture

example
Inductions

① Year of production 19 years → 19, 20 years → 20, 21 years → 21 ….

② Year of production
January → January, February → February, March → 3 …. October → A, November → B, December → C

Logo

Documents / Resources

ZALMAN N5 OF ATX MID Tower Computer Case [pdf] User Manual
N5 OF, ATX MID Tower Computer Case, N5 OF ATX MID Tower Computer Case, MID Tower Computer Case, Tower Computer Case, Computer Case, Case
ZALMAN N5 OF ATX MID Tower Computer Case [pdf] User Manual
N5 OF ATX MID Tower Computer Case, N5 OF, ATX MID Tower Computer Case, MID Tower Computer Case, Tower Computer Case, Computer Case, Case
ZALMAN N5 OF ATX Mid Tower Computer Case [pdf] User Manual
N5 OF, ATX Mid Tower Computer Case, N5 OF ATX Mid Tower Computer Case, Mid Tower Computer Case, Tower Computer Case, Computer Case, Case

References

Leave a comment

Your email address will not be published. Required fields are marked *