XIFIXIT Universal System Selector Button Replacement

Product Information

GameStop Universal System Selector Button
This product is a replacement button designed for the GameStop Universal System Selector. It allows users to easily replace a malfunctioning or damaged system selector button without the need for professional help.

Specifications

• Compatibility: GameStop Universal System Selector
• Power Requirement: DC 6V
• Tools Required: Phillips #00 Screwdriver (1)

Product Usage Instructions

1. Step 1 – Disconnect Power
   Disconnect the DC 6V IN power cable from the device.
2. Step 2 – Access Button
   Remove the three front panel screws located on the bottom of the device.
3. Step 3 – Remove Button
   Carefully pry off the front panel to access the button that needs replacement.
4. Step 4 – Replace Button
   
   1. Pull firmly on the button that needs replacement to remove it from its housing.
   2. Push the replacement button into the empty slot.
5. Step 5 – Complete Replacement
   
   1. Snap the front panel back into place.
   2. Re-insert the three front panel screws to secure the replacement.

Your system selector button should now be functioning properly.

TOOLS:
Phillips #00 Screwdriver (1)

FAQ

Q: Do I need any special skills to replace the button?
A: No, this replacement process can be done by following the provided instructions without any special skills.

Q: Can I use this replacement button with other devices?
A: This button is specifically designed for use with the GameStop Universal System Selector and may not be compatible with other devices.

Documents / Resources

XIFIXIT Universal System Selector Button Replacement [pdf] User Guide Universal System Selector Button Replacement, Universal System Selector Button Replacement, Selector Button Replacement, Button Replacement, Replacement

References

• User Manual