Product Information
The Heavy Duty Push Button Latch is a durable and reliable door latch designed for heavy-duty applications. It features a lock button for added security (keyed versions only) and is easy to install. The latch is made of high-quality materials to ensurelong-lasting performance.
Specifications
- Door Thickness: 1-3/4″ (44.45 mm) to 2″ (50.8 mm)
- Screw Selection: 6-32 THD
Tools Required
- Phillips Screwdriver
- 5/16 Drill (7.9 mm)
- Pliers (Qty 2)
Warranty
The Heavy Duty Push Button Latch comes with a full one-year warranty. For warranty details, to make a warranty claim for repair or replacement, please visit www.hampton.care or contact Hampton Care at 1-800-562-5625. Please retain the receipt and be prepared to provide it for warranty claims.
Product Usage Instructions
New Installation Instructions
- Determine the thickness of the door.
- Using a Phillips screwdriver, select the appropriate screws from the screw selection chart.
- Drill installation holes, ensuring that the latch will not interfere with entrance hardware.
- Place the drill template on the door, tape it down, and mark the hole centers.
- Drill holes according to the marked centers.
- Assemble the lock button (for keyed versions only) by orientating the flat surfaces.
Replacement Installation Instructions
- Determine the spindle length.
- Verify the door hole pattern.
- Assemble the door latch by aligning the arrow to the door face and breaking off the spindle at the marked point.
- Verify the strike.
Note: If the hole pattern does not match, refer to the New Installation instructions in Step 4.
DETERMINE DOOR THICKNESS 
SCREW SELECTION CHART
TEMPLATE
DRILL INSTALLATION HOLES
CAUTION: LOCATE INSTALLATION SO THAT LATCH WILL NOT INTERFERE WITH ENTRANCE HARDWARE
DETERMINE SPINDLE LENGTH
BREAK OFF SPINDLE AT MARK
ASSEMBLE LOCK BUTTON (FOR KEYED VERSIONS ONLY)
ASSEMBLE DOOR LATCH
NOTE: The handle styles illustrated may vary by model. 
VERIFY STRIKE
EXISITING MOUNTING HOLES IN DOOR
Note: If hole pattern does not match see “New Installation” instruction Step 4.
DETERMINE DOOR THICKNESS 
SCREW SELECTION CHART
DETERMINE SPINDLE LENGTH
BREAK OFF SPINDLE AT MARK 
ASSEMBLE DOOR LATCH
NOTE: The handle styles illustrated may vary by model.
VERIFY STRIKE 
- 50 Icon, Foothill Ranch, CA 92610-3000
- email: info@hamptonproducts.com
- www.hamptonproducts.com
- 1-800-562-5625 ©2022 Hampton
- Products International Corp. 95012000_REVC 08/22
- FULL ONE YEAR WARRANTY – For warranty details or to make a warranty claim for repair or replacement, please visit www.hampton.care or contact Hampton Care at 1-800-562-5625. Return of defective product and receipt may be required for warranty claims.
Documents / Resources
 |
WRIGHT V444-2 Push Button Handle Heavy Duty [pdf] Instructions V444-2 Push Button Handle Heavy Duty, V444-2, Push Button Handle Heavy Duty, Handle Heavy Duty, Heavy Duty, Duty |