WARMZONE ETOG-55 Ground Sensor for Ice and Snow Melting
Product Specifications
- Model: ETOK-1 and ETOG-56
- Application: Ground sensor for ice and snow melting
- Cable Length:
- ETOG-55: 33 feet (10 meters)
- ETOG-56: 82 feet (25 meters)
Product Usage Instructions
Installation:
- The ground sensor is easily installed in the cradle (cup) provided. Ensure the power cord extends out from the bottom of the cup for proper connection.
Cable Installation:
- When installing the ETOG-56 with 82 feet of cable, ensure the cable is properly run through a cable pipe. Use a lead/pull wire during installation to guide the cable through the pipe efficiently.
Protection:
- The sensor comes with a wood plug/cover to protect the hole where it is installed. This cover helps safeguard the sensor during construction activities such as pouring asphalt or concrete.
FAQs
- Q: Can the sensor be installed in any type of ground surface?
- A: The sensor is designed for installation in asphalt, concrete, or other suitable ground surfaces. Ensure proper protection during installation to prevent damage.
- Q: How do I connect the sensor to the melting system?
- A: Connect the power cord of the sensor to the appropriate input on your ice and snow melting system following the system’s installation instructions.
Contents
ETOK-1 and ETOG-56 ground sensor and kit for ice and snow melting (below).
The sensor is easily installed in the cradle (cup). The power cord extends out from the bottom of the cup.
Dimensions
Installation Information
The ETOG-55 remains as the cost effective option with 33 feet (10 meters) of cable. The ETOG-56 is delivered with 82 feet (25 meters) of cable. The cable can easily be run the cable pipe when a lead/pull wire has been installed.
Documents / Resources
 |
WARMZONE ETOG-55 Ground Sensor for Ice and Snow Melting [pdf] User Guide ETOG-55, ETOG-56, ETOG-55 Ground Sensor for Ice and Snow Melting, ETOG-55, Ground Sensor for Ice and Snow Melting, Ice and Snow Melting, Snow Melting, Melting |