Ventair FLINKPIX Smart Home App Control Module
PIXIE Smart Home App Control Module (for use with the Ventair SKYFAN)
Specifications
- Model: FLINKPIX
- Product: PIXIE Smart Home App Control Module
- Compatibility: Ventair SKYFAN
- Version: 1.0.7
WARNING
For your safety, this product must be installed by a licensed electrician to prevent serious injury or electrical hazard.
Installation
- Isolate the power to the fan.
- Twist the fan canopy in a clockwise direction to drop it down.
- Remove the orange dust cover from the USB slot on the SkyFan receiver.
- Carefully insert the FLINKPIX module.
- Replace the canopy by sliding upwards and re-x by twisting anticlockwise.
App Selection
- There are two apps: PIXIE and PIXIE PLUS.
- Both are available for free on your Android or Apple mobile device.
- The most suitable app for you will depend on your individual needs.
- PIXIE is best used for customers who:
- Do not require out-of-home control.
- Do not require voice control.
- Prefer not to connect their smart home components to the internet.
PIXIE PLUS requires a Wi-Fi connection as well as a SAL PIXIE GATEWAY (Available Separately). Additional PIXIE PLUS features include: Out of home control, Voice control, Scheduling of Scenes, as well as Google Home., Amazon Alexa, Siri & SmartThings support.
Adding your Skyfan DC to the PIXIE App
- Ensure Bluetooth is enabled on your phone.
- Open the PIXIE App and allow any permission requests.
- PIXIE will automatically start searching for compatible devices.
- A list of compatible devices will be shown. Locate your Skyfan and press “Add”.
- Select “Finish” or “Add More” depending on the number of devices being set up.
Adding your SkyFan DC to the “PIXIE PLUS” App
- Ensure you’ve created a PIXIE PLUS account and set up your PIXIE GATEWAY.
- Ensure Bluetooth is enabled on your phone.
- Open the PIXIE PLUS App, allow any permission requests & log in.
- Tap “Device” on the Home Page the tap “ ” in the right corner, and select “Add device”.
- Locatethe target Fan. Tap the “Add” button, and the fan will be added momentarily.
Add Fan to the APP
Fan control via PIXIE (Basic)
Fan control via PIXIE (Advanced)
Adding your SkyFan to the PIXIE PLUS APP
PIXIE PLUS – Changing your fan name and timer functions
PIXIE APP SUPPORT
PH: 1800 256 843
pixiesupport@sal.net.au
SKYFAN SUPPORT
PH: 03 9775 0556
support@ventair.com.au
Documents / Resources
 |
ventair FLINKPIX Smart Home App Control Module [pdf] Instruction Manual FLINKPIX Smart Home App Control Module, FLINKPIX, Smart Home App Control Module, Home App Control Module, App Control Module, Control Module, Module |