FNROT Run On Timer
“
Product Information
Add a Timer to Exhaust Fan/Lighting
Combination
Now you can easily add a timer to any exhaust fan and lighting
installation with the new Falcon FNROT Run-On-Timer. Optimized for
the Falcon range of fans, this timer can be wired to the fan
circuit behind the wall switch. It offers 4 delay-off settings for
your convenience.
Perfect for bathrooms and laundry areas that require extended
periods of ventilation due to condensation issues and odors, this
timer helps prevent mold and mildew.
Specifications:
- Model: FNROT
- Input Voltage: 220-240V~, 50Hz
- Max. Load: 150W (0.68A) Motor only
- Operating Temperature: -10°C ~ 50°C
- Suitable for indoor use only
- Switches shall be protected by 10AMCB35A
- Ensure a fuse equal to 1.25A or less is in the power
supply
Product Usage Instructions
Installation:
- Ensure power is turned off before installation.
- Follow the wiring instructions provided in the manual.
- Connect the timer to the fan circuit behind the wall
switch.
Setting the Timer:
- Select one of the 4 delay-off settings on the 2 dip switches
according to your preference. - Ensure proper functionality by setting up the timer
correctly.
Usage:
- Once installed and set, the timer will automatically control
the operation of your exhaust fan and lighting combination. - Enjoy extended periods of ventilation without having to
manually turn off the fan.
FAQ
Q: What should I do if the timer is not functioning
correctly?
A: Make sure the timer is installed as per the
wiring instructions provided. Incorrect installation can lead to
malfunctioning of the timer.
“`
ADD A TIMER TO EXHAUST FAN/ LIGHTING COMBINATION*
Now you can add a timer to any exhaust fan and lighting installation with the new Falcon FNROT Run-On-Timer. Optimised for the Falcon range of fans, simply wire to the fan circuit
behind the wall switch and select one of 4 delay-off settings on the 2 dip switches:
Perfect for all bathrooms and laundry areas that require extended periods of ventilation due to condensation issues and odours. Helps prevent mould and mildew. Part No FNROT
Falcon Run On Timer Switch Max 150W 220 240V ac 50Hz Time Max 90 minutes
Specifications Model: FNROT Input Voltage: 220-240V~, 50Hz Max. Load: 150W (0.68A) Motor only Operating Temperature: -10C ~ 50C Suitable for indoor use only Switches shall be protected by 10AMCB35A Ensure a fuse equal to 1.25A or less is in power supply
* Can also be used with bathroom fan light heaters fan circuit only as well as standard lighting applications.
Must be installed as per wiring instructions. Timer will not function correctly otherwise.
Documents / Resources
 | TRADER FNROT Run On Timer [pdf] User Manual FNROT, FNROT Run On Timer, FNROT, Run On Timer, On Timer, Timer |