Touche Controls SS-K Smart Keyed Switch
Specifications
- Product Name: Smart Keyed Switch
- Model: SS-K
- LED Colors: Red, Green, Blue
- Communication: SmartNet
- Cable Type: Minimum CAT 5
- Maximum SmartNet Length: 400′
Product Usage Instructions
Installation
- Mount the Smart Keyed Switch to a single gang junction box or a 4 square box with a single gang mud ring.
- Ensure cables are plugged into Smart ports of room managers, SmartPack Plusses, or SmartPacks. Do not connect to branch ports.
LED Indications
- Red LED: Indicates Lockout mode.
- Green LED: Indicates Lockout Timer mode.
- Blue LED: Indicates Manual mode.
Troubleshooting Tips
- If there is a communication error, verify the cabling termination color coding.
- In case of a port error, ensure it is not plugged into a branch port.
- The default mode is Lockout.
FAQs
Q: What should I do if I encounter a communication error?
A: Verify the cabling termination color coding to resolve any communication errors.
Q: What is the default mode of the Smart Keyed Switch?
A: The default mode is Lockout.
Q: What is the maximum SmartNet length supported by the Smart Keyed Switch?
A: The maximum SmartNet length should not exceed 400 feet.
LED INFORMATION
NOTES
- MINIMUM CAT 5 CABLE – ENSURE CABLES ARE PLUGGED INTO SMART PORTS OF ROOM MANAGERS, SMARTPACK PLUSSES, OR SMARTPACKSDO NOT CONNECT TO BRANCH PORTS
- MOUNT TO SINGLE GANG JUNCTION BOX OR 4 SQUARE BOX WITH SINGLE GANG MUD RING
CONNECTIONS
CONTACT INFORMATION
- 2085 Humphrey Street, Fort Wayne, IN 46803
- T: 888.841.4356
- W: ToucheControls.com
Documents / Resources
 |
Touche Controls SS-K Smart Keyed Switch [pdf] Installation Guide SS-K, SS-K Smart Keyed Switch, Smart Keyed Switch, Keyed Switch, Switch |
