SRBP Series Corcom Shielded Power Inlet Filter
“
Product Information
Corcom SRB Series Shielded Power Inlet Filter
The Corcom SRB Series is a minimum depth, cost-effective
shielded power inlet filter designed for various applications
requiring effective electromagnetic interference (EMI)
suppression.
Specifications
- UL Recognized, CSA Certified, VDE Approved
- Operating Frequency: 50/60 Hz
- Rated Voltage: 250 VAC
- Rated Current: 15A
- Capacitor Options: Q, R, S, T, W, X, Y, Z
- Hipot Rating: 2250 VDC Line to Ground, 1450 VDC Line to
Line
Ordering Information
To order, use the format: 15 SRB S 1 – Q (Example)
Dimensions
Dimensions are in inches and millimeters unless otherwise
specified. Values in italics are metric equivalents.
Product Usage Instructions
Installation
- Ensure power is disconnected before installation.
- Mount the SRB Series filter securely in the desired
location. - Connect the input power lines to the designated terminals
following proper polarity. - Ground the filter according to local electrical codes.
Maintenance
Regularly inspect the filter for any signs of damage or wear.
Replace if necessary to maintain optimal performance.
FAQ
- Q: What is the maximum leakage current for each Line to Ground
at different voltages? - A: @120 VAC: 2.1 A, @250 VAC: 3.65 A
- Q: What are the available capacitor options for the SRB
Series? - A: Q (33 pF), R (100 pF), S (220 pF), T (330 pF), W (470 pF), X
(1000 pF), Y (2200 pF), Z (3300 pF) - Q: How should I calculate the maximum operating current for the
SRB Series? - A: Io = Ir (85-Ta)/45, where Io is the maximum operating
current, Ir is the rated current, and Ta is the ambient
temperature.
“`
Corcom Product Guide
Catalog: 1654001 Issue Date: 06.2011
Minimum Depth, Cost-effective Shielded Power Inlet Filter
SRB Series
UL Recognized CSA Certified VDE Approved*
SRBP
SRBS8
SRB1
SRB2
SRB Series
Specifications
· Smallest depth Corcom RFI filter available · Complete shield · Wide range of capacitor values · Attenuates coupled EMI up to 300MHz · Minimal to low leakage current versions are
suitable for patient and non-patient contact medical equipment. · Full range of mounting and termination options including unique vertical and horizontal orientation slide in mounts eliminate the need for mounting hardware
Ordering Information
15 SRB S 1 – Q
Maximum leakage current each Line to Ground:
@120 VAC
@250 VAC
Capacitor ID / Value
60 Hz
50 Hz
Blank / None
2 A
5 A
Q / 33 pF
2.1 A
3.65 A
R / 100 pF
9.6 A
16.6 A
S / 220 pF
19.2 A
33.2 A
T / 330 pF
24.0 A
41.5 A
W / 470 pF
0.04 mA
0.07 mA
X / 1000 pF
0.07 mA
0.13 mA
Y / 2200 pF
0.16 mA
0.28 mA
Z / 3300 pF
0.24 mA
0.42 mA
Hipot rating (one minute): Line to Ground: Line to Line:
2250 VDC 1450 VDC
Rated Voltage (max.):
250 VAC
3
Power Inlet Filters & Power Entry Modules
Capacitor ID See Chart Omit if none
Output Styles 1 Spade terminals (back) 2 Spade terminals (bottom) 8 Wire leads P PC board pins
Operating Frequency:
50/60 Hz
Rated Current:
15A*
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir (85-Ta)/45
Capacitor Options
Mounting Style S Snap-in X Slide-in (short edge / horizontal) Y Slide-in (long edge / vertical) Omit for flange mount
SRB Series
Current Rating 15A
Capacitor ID Q R S T W X Y* Z*
Capacitor Value 33 pF 100 pF 220 pF 330 pF 470 pF
1000 pF 2200 pF 3300 pF
*15A versions are tested by Underwriters Laboratories to US and Canadian requirements and are VDE approved at 10A, 250VAC
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.
*Not available in SRB8, SRBX or SRBY styles
203
For email, phone or live chat, please go to te.com/help corcom.com
Downloaded from Arrow.com.
Corcom Product Guide
Catalog: 1654001 Issue Date: 06.2011
Minimum Depth, Cost-effective Shielded Power Inlet Filter (continued)
SRB Series
Available Part Numbers
Flange Mount
15SRB1 15SRB1-Q 15SRB1-R 15SRB1-S 15SRB1-T 15SRB1-W 15SRB1-X 15SRB1-Y 15SRB1-Z
15SRB2 15SRB2-Q 15SRB2-R 15SRB2-S 15SRB2-T 15SRB2-W 15SRB2-X 15SRB2-Y 15SRB2-Z
15SRBP 15SRBP-Q 15SRBP-R 15SRBP-S 15SRBP-T 15SRBP-W 15SRBP-X 15SRBP-Y 15SRBP-Z
15SRB8 15SRB8-Q 15SRB8-R 15SRB8-S 15SRB8-T 15SRB8-W 15SRB8-X
Snap-In
Slide-In
15SRBS1 15SRBS8 15SRBX8 15SRBY8 15SRBS1-Q 15SRBS8-Q 15SRBX8-Q 15SRBY8-Q 15SRBS1-R 15SRBS8-R 15SRBX8-R 15SRBY8-R 15SRBS1-S 15SRBS8-S 15SRBX8-S 15SRBY8-S 15SRBS1-T 15SRBS8-T 15SRBX8-T 15SRBY8-T 15SRBS1-W 15SRBS8-W 15SRBX8-W 15SRBY8-W 15SRBS1-X 15SRBS8-X 15SRBX8-X 15SRBY8-X 15SRBS1-Y 15SRBS1-Z
Electrical Schematic LINE
LOAD
Case Styles SRB1
C
D E
SRB2
C
D E
SRBP
C
A
B
A
B
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord
D E
SRBS1
A
B
C
D E
A
B
204
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.
Downloaded from Arrow.com.
For email, phone or live chat, please go to te.com/help corcom.com
Corcom Product Guide
Catalog: 1654001 Issue Date: 06.2011
Minimum Depth, Cost-effective Shielded Power Inlet Filter (continued)
SRB Series
Case Styles (continued) SRB8
DE
Blue Green/Yellow
B
Brown
A
max.
0.96 24.39
SRBS8
DE
C
Blue Green/Yellow
B
Brown
max.
0.96 24.39
A C
SRBX8
DE
Blue
Grn/Yel
B
Brown
.045
A
SRBY8
.045
DE
A
Blue Grn/Yel
B
Brown
C
Engage panel edge here
Case Dimensions
Part No.
A
B
15SRB1 15SRB2 15SRBP 15SRBS1 15SRB8 15SRBS8 15SRBX8 15SRBY8
C
D
E
C
Engage panel edge here
Power Inlet Filters & Power Entry Modules
3
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.
Downloaded from Arrow.com.
205
For email, phone or live chat, please go to
te.com/help
corcom.com
Corcom Product Guide
Catalog: 1654001 Issue Date: 06.2011
Minimum Depth, Cost-effective Shielded Power Inlet Filter (continued)
SRB Series
Recommended Panel Cutouts
PC Board Layout
SRB1, SRB2, SRBP & SRB8
Front Mount
Back Mount
.820 20.8
.900 22.9
1.200 30.48
1.575 40.01
.140 3.56
.12 3.05
R. Typ.
1.200 30.48
1.575 40.01
Tolerances ± .005 [0.13] unless otherwise noted
.140 3.56 .234 R. 5.94 Typ.
SRBS
G
R
0.188 4.775
Max.
0.815 20.70
Tolerance ±.002 [.050]
SRBX
.685* 17.40*
0.551 13.99
*±.015 [0.38]
0.075 1.91
0.520 13.21
SRBX8
Cover
Jacket Flange
R
0.15 3.81
max.
1.066
27.07
± .005 [.127]
.722
.836
18.34min. 21.23min.
Panel Thickness .039 [1.0] ± .005 [.127]
SRBY
Cover
Jacket Flange
R
0.15 3.81
max.
.741 18.82
± .005 [.127]
1.05
1.15
26.67min. 29.21min.
Panel Thickness .039 [1.0] ± .005 [.127]
206
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.
Downloaded from Arrow.com.
For email, phone or live chat, please go to te.com/help corcom.com
Corcom Product Guide
Catalog: 1654001 Issue Date: 06.2011
Minimum Depth, Cost-effective Shielded Power Inlet Filter (continued)
SRB Series
Performance Data Typical Insertion Loss
Measured in closed 50 Ohm system
Q
R
db
db
40
40
35
35
30
30
25
25
20
20
15
15
10
10
5
5
0
0
1
10
100 300
1
10
Frequency in MHz
100 300 Frequency in MHz
S
db 40 35 30 25 20 15 10
5 0
1
T
db 40
35
30
25
20
15
10
5
0
10
100 300
1
Frequency in MHz
10
100 300
Frequency in MHz
W
db 40 35 30 25 20 15 10
5 0
1
X
db 40
35
30
25
20
15
10
5
0
10
100 300
1
Frequency in MHz
Y
db 40
35
30
25
20
15
10
5
0
10
100 300
1
Frequency in MHz
Z
db 40
35
30
25
20
15
10
5
0
10
100 300
1
Frequency in MHz
Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L)
Minimum Insertion Loss
Measured in closed 50 Ohm system
Common Mode / Asymmetrical (Line to Ground)
10
100 300
Frequency in MHz
Power Inlet Filters & Power Entry Modules
3
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.
Downloaded from Arrow.com.
207
For email, phone or live chat, please go to
te.com/help
corcom.com
Documents / Resources
 |
TE Connectivity SRBP Series Corcom Shielded Power Inlet Filter [pdf] User Guide SRBP, SRBS8, SRB1, SRB2, SRBP Series Corcom Shielded Power Inlet Filter, SRBP Series, Corcom Shielded Power Inlet Filter, Shielded Power Inlet Filter, Power Inlet Filter, Inlet Filter, Filter |