Discover detailed instructions and specifications for the 8845-200 Wall Mount IoT Sensor and its accessories. Learn how to install, configure, and test this sensor for optimal performance. Find support information and regulatory guidelines included.
Discover the Aloxy Pulse V01 Battery Powered Wireless IOT Sensor, equipped with temperature and inertial sensors. Easily program and configure this DEKRA certified device for data collection and transmission over supported networks. Follow these user-friendly instructions for setup, event recording, and data analysis. Replace the 3.6V battery pack as needed.
The Aloxy Pulse V01 Wireless IOT Sensor user manual provides detailed instructions for setting up and using the Aloxy Pulse V01. Learn how to connect the equipment to a power source, establish communication with other devices, and ensure safety precautions. Find additional information in the comprehensive user manual.
Discover the MtoMe IoT Sensor, a versatile attachable linear and rotational motion counting device. Enhance your fitness routine with VRFit and experience 360 virtual exercises on your smartphone. Avoid disassembly, water exposure, and direct force application. Stay away from electromagnetic wave-emitting devices for optimal performance. Get started with supported applications like Zwift and Bkool fitness for an immersive workout experience.
Learn about the HarvyLR-36 and HarvyLR-360 IoT Sensors, designed to record AC and DC currents through LoRaWAN. Discover their features, safety instructions, and how to integrate them into the deZem DataSuite for online access to metered value histories.
This user guide provides specifications, wiring diagrams, and installation instructions for the SABRE IoT Sensor, including the Mini Mullion, Mullion, Wall Mount, and Keypad models. Learn how to wire the sensor, mount the reader, and test it with an RFID card. Use the Safetrust Wallet APP to configure the system.
Learn how to wire, install and configure the SA520 SABRE IoT Sensor with this quick start guide. Featuring detailed specifications, parts list, and wiring diagram for Wiegand or OSDP output.
Learn how to install and configure the Safetrust SA510 Sabre IoT Sensor with this user guide. Find specifications, wiring diagrams, and step-by-step instructions for setting up the sensor and using it with the Safe trust Wallet app.
Learn how to use the Haltian Thingsee BEAM Wireless IoT Sensor with this user manual. Measure short distance fill levels of various facility management applications like smart cleaning and asset tracking. Get accurate measurements with adjustable beam sensor and avoid glossy surfaces. Install above or below the surface with 90º angle recommended.
Learn how to use the Haltian Environment Rugged Wireless IoT Sensor with this user manual. This IP67 approved sensor is ideal for harsh environments, measuring temperature, orientation, and magnetic fields. Discover how it can monitor machine usage and improve environmental management planning with factual data. Avoid installation near thick concrete structures, electrical transformers or direct sunlight.
