TACHIKAWA LOGO

TACHIKAWA IR Remote Controller

TACHIKAWA IR Remote

Product Information: IR Remote Controller

The IR Remote Controller is a device that allows you to control the movement of your blinds. The controller comes with an instruction manual that guides you on how to operate it. It features buttons for opening, closing, and stopping the movement of the blinds. Additionally, it has a slats tilting function that allows you to tilt the slats while pressing a button. The remote controller also comes with a free position function that enables the blind and slats to return to a specific position of your choice. The device is powered by batteries.

Product Usage Instructions

To Change the Setting

To change the setting, tap the button labeled “Operation Manual Perle Pair” or “Operation Manual Perle Double.”

To Replace the Batteries

To replace the batteries, follow these steps:

  1. Mark open the cover by sliding the mark
  2. Replace the batteries according to the illustration
  3. Pay attention to the direction of the batteries. Inserting them the wrong way may cause troubles.

Address Button

The button number should link to the address number of the blinds for simultaneous operation.

TACHIKAWA IR Remote Controller 1

Button No. shall link to the address No. of the blinds.

TACHIKAWA IR Remote 2

For simultaneous operation.

Open / Close

To open (Up) the blinds, push the “OPEN” button. To close (down) the blinds, push the “CLOSE” button. To stop the movement of the blinds, push the “STOP” button.

TACHIKAWA IR Remote Controller 3

To close (down) the blinds

TACHIKAWA IR Remote 4

To stop the movment.

Slats Tilting

The slats keep tilting while pressing the corresponding button.

TACHIKAWA IR Remote Controller 5

The slats keep tilting while pressing.

Free Position

The free position function allows you to return the blind and slats to a specified position. To specify the free position:

TACHIKAWA IR Remote Controller 5

Blind and slats return to the specified position.
◎ To specify free position.

How to specify free position

  1. Set the blind(s) and slats to the appropriate position
  2. Keep pressing the “STOP” and “STAR” button for 5 secondsTACHIKAWA IR Remote Controller 6
  3. The blind(s) will move up/down, and a buzzer will sound when the setting is correctly completed.

Operation Manual Perle Pair(CLOSE)

Push CLOSE then the fabric on the bottom will move down.TACHIKAWA IR Remote Controller 7

Push CLOSE again then the fabric on the top will move downTACHIKAWA IR Remote Controller 8

Push STOP then all movement will stop.

Operation Manual Perle Pair(OPEN)

Push OPEN then the fabric on the top will move up.TACHIKAWA IR Remote Controller 9

Push OPEN again then the fabric on the bottom will move up.TACHIKAWA IR Remote Controller 10

Push STOP then all movement will stop.

Operation Manual Perle Double(CLOSE)

Push CLOSE then the window side fabric will move down.TACHIKAWA IR Remote Controller 11

Push CLOSE again then the room-side fabric will move down.TACHIKAWA IR Remote Controller 12

Push STOP then all movement will stop.

Operation Manual Perle Double(OPEN)

Push OPEN then the room side fabric will move up.TACHIKAWA IR Remote Controller 13

Push OPEN again then the window side fabric will move up.TACHIKAWA IR Remote Controller 14

Push STOP then all movement will stop.

To change the batteriesTACHIKAWA IR Remote Controller 15

replace the batteries with following the illustrationTACHIKAWA IR Remote Controller 16

Pay attention to the direction of the batteries. The wrong way may cause of the trouble.

Documents / Resources

TACHIKAWA IR Remote Controller [pdf] User Manual
IR Remote Controller, Remote Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *