Sunricher DMX512 Dual Color Controller
Product Information
Specifications:
- Product Name: Dual Color DMX512 Controller
- Model Number: 09.28BDU.04186
- Dimensions: 75x120x29.1mm
- Total Zones: 4
- Power Supply: 12-24VDC
- Output Signal: DMX512
Product Usage Instructions
Function Introduction:
Dual color & brightness slider, click to switch between 100% WW+0% CW and 0% WW+100% CW. Click to turn on/off at 100% brightness. Press and hold down to save color; click to recall the saved setting. Click to switch between dual color control or brightness control.
Total of 4 zones are available. Click to choose a zone; press and hold down to turn on/off the corresponding zone at 0% brightness.
Wiring Diagram:
Refer to the wiring diagram provided in the manual for proper installation.
Installation:
- Connect the DC Input and DMX Output as per the wiring diagram.
- Set the DMX address for controlling different zones as mentioned in the user manual.
Connecting with Dual Color LED Strip:
Follow the wiring instructions to connect the controller with a dual-color LED strip.
FAQs
- How do I set the DMX address for controlling different zones?
To set the DMX address, follow the instructions provided in the user manual. Assign specific addresses to DMX decoders for each zone – 001 for zone 1, 005 for zone 2, 009 for zone 3, and 013 for zone 4.
Important: Read All Instructions Before Installation.
Function introduction
DIMENSION
Product Data
- Output Signal: DMX512 signal
- Power Supply: 12-24VDC
- Power consumption: < 20 mA
- Operating temperature: 0-40°C
- Relative humidity: 8% to 80%
- Dimensions: 75x120x29.1mm
FEATURES
- Touch-sensitive
- Glass interface(white & black)
- Standard DMX512 Signal output
- Control CCT color
- Control 4 zones synchronously and separately
- Waterproof grade: IP20
Safety & Warnings
- DO NOT install with power applied to the device.
- DO NOT expose the device to moisture.
Installation
Wiring diagram
Set DMX Address
- This DMX master controller controls 4 zones of DMX decoders by setting DMX decoders’ address as follows:
- DMX decoders with address 001 will be controlled by zone 1,
- DMX decoders with address 005 will be controlled by zone 2,
- DMX decoders with address 009 will be controlled by zone 3,
- DMX decoders with address 013 will be controlled by zone 4.
Documents / Resources
 |
Sunricher DMX512 Dual Color Controller [pdf] Instructions 2830BDMXUS, 09.28BDU.04186, DMX512 Dual Color Controller, DMX512, Dual Color Controller, Color Controller, DMX512 Controller |