sprout AI-DW_r4 Practical Life Table
Product Usage Instructions
Assembly:
- Insert tabs on Braces A & B into slots on Side Panel C and press down to lock.
- Press down on Braces A & B to lock them into place.
- Thread screws into slats using the hex wrench.
- Insert Slats with holes D into the outermost slots on Side Panel C. Insert remaining Slats E and Dowels F into designated places.
- Set the second Side Panel C into position, fitting the dowels into the holes and working your way across one at a time. Carefully set upright.
- Using a rubber mallet, push the Table Top G sideways so the tabs lock in with the notch.
- Align the slots on Table Top G with tabs on Braces A & B. Push down until flush with the top of Side Panels.
- If necessary, carefully place the unit on its end and push down on the top edge of the Side Panels to tighten.
Safety Instructions:
- Adult assembly only. Assemble completely before use.
- Do not use this product without adult supervision.
FAQ:
- Q: What should I do if I encounter difficulties during assembly?
A: If you are frustrated or need help during assembly, please contact our customer service agent at +1 833-530-0033 or email us at support@sprout-kids.com for assistance. - Q: How do I secure the screw-in hooks into the product?
A: As desired, insert screw-in hooks into holes on the outside of the Side Panels. If necessary, tighten with pliers with jaws wrapped with cloth to ensure a secure fit. - Q: Where can I find more information about the product?
A: For more information and details, visit our website at www.sprout-kids.com or refer to the user manual provided with the product.
Parts List
Assembly Instruction
- Grooves on Support Panels should be oriented inwards as pictured above.
- Insert tabs on Braces A & B into slots on Side Panel C and press down to lock.
- Insert Slats with holes D into outermost slots on Side Panel C. Insert remaining Slats E and Dowels F into designated places.
- Set the second Side of Panel C into position. It helps to start at one side fitting the dowels into the holes and work your way across one at a time. Carefully set upright.
- Press down on Braces A & B to lock into place. Thread screws into slats with a hex wrench.
- Align up slots on Table Top G with tabs on Braces A & B. Push down until flush with the top of Side Panels.
- Using a rubber mallet, push the Table Top G sideways so the tabs lock in with the notch as pictured above.
- If necessary, carefully place the unit on its end, and push down on the top edge of the Side Panels to tighten.
- As desired, insert screw-in hooks into holes on the outside of the Side Panels. If necessary, tighten with pliers with jaws wrapped with cloth.
Important
- Adult assembly only
- Assemble completely before use
- Assemble on a hard floor
- Do not use this product without Adult Supervision
Contact Information
Frustrated?
Need Help?
Talk to our customer
- QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
- service agent at +1 833-530-0033
- Or email us at: support@sprout-kids.com.
- WWW.SPROUT-KIDS.COM.
Documents / Resources
 |
sprout AI-DW_r4 Practical Life Table [pdf] Installation Guide AI-DW-PracticalLife_r1, AI-DW_r4, AI-DW_r4 Practical Life Table, AI-DW_r4, Practical Life Table, Life Table, Table |
