SIGMA 01050 ROX 2.0 Cycle Navigation Computer
REMARKS
This manual is a quick guide.
You can access the detailed instructions by following this link:
goto.sigmasport.com/rox2-0
CONTENTS
INSTALLATION
❶ START/STOP/MENU Button
- Start training
- Stop training
- Confi rm input
- One menu level down
- Switch on the device (press for 3s)
Press and hold button:
- Open and close menu
❷ PLUS Button
- One page forward
- Increase value
Press and hold button:
- Save and reset training values
FIRST START
❶ Press START Button for 5s to Wake-Up.
❷ Choose YES to pair a Smartphone, choose NO to manually set the device.
❸ Download SIGMA RIDE App and follow App instructions to confi gure your device.
❹ OR set device and user settings manually.
❺ Enjoy your device and start your first ride!
 |
 |
 |
|
| The app offers you many functions for setting up and customising the ROX 2.0. For more information on the app functions, see the „SIGMA RIDE app“ page. | |
TRAINING
❶ Press START button for 3s to start the device.
❷ Don‘t move and search for clear sky location for fast GPS fix.
❸ Wait for „GPS OK“. Press START button to start the training session.
❹ Press START button to stop the training session.
❺ Hold „+“ button to reset training values and save your training.
❻ Sync with Smartphone for full data analysis and sharing.
❶ Hold START button, when training is NOT started.
❷ You have access to the main menu with all the functions of the ROX 2.0.
❶ Hold START button, when training is active or in auto pause.
❷ You can edit the most important settings during training.
SETTINGS
❶ Choose Settings in main menu to set the device.
❷ You can edit Device settings and Totals.
❸ Choose a setting you want to edit and press START button to set.
❹ Press “+” button to increase a value or to toggle through options.
❺ Press START button to confi rm the settings
❻ Use the App to set your training views.
❼ Use the App or SIGMA DATA CENTER to update your firmware.
E-BIKE CONNECTION
❶ Choose Main Menu > Connection > E-Bike to pair a new E-Bike or manage paired Bike.
❷ Make sure that E-Bike is switched on!
❸ Press START button to pair E-Bike.
SIGMA RIDE APP
❶ Set Device and Training Views
❷ Firmware Update
❸ Analyze your training
❹ Share your data and many more…
 |
TIP : Check for Firmware Updates regularly. To access the changelog, follow this link: |
CHARGING AND DATA TRANSFER
❶ Open USB Cover.
❷ Insert USB-C cable.
Check that the cable and port are dry!
❸ Charge with 5V max. 1000mA.
❹ Connect to PC for data transfer.
! IMPORTANT: Please ensure that the USB cover is always closed before starting a training session.
TECHNICAL INFORMATION
| ROX 2.0 | |
| Battery type | Rechargeable 350 mAh, 3.7 V Battery |
| Operation temperature | 0 °C to 60 °C |
| Operation frequency | ANT+ 2.4 GHz @ 1 dBm nominal Bluetooth 2.4 GHz @ 1 dBm nominal GPS 1575.42 MHz (receiver only) GLONASS 1602 MHz (receiver only) |
| Transmission power | <4 dBm |
| Water and Dust rating | IPX7 |
! You can find the CE declaration at: ce.sigmasport.com/rox20
Dr.-Julius-Leber-Straße 15
67433 Neustadt/Weinstraße
Germany
kundenservice@sigmasport.com
Documents / Resources
 |
SIGMA 01050 ROX 2.0 Cycle Navigation Computer [pdf] Owner's Manual 01050, ROX 2.0 Cycle Navigation Computer, ROX 2.0, Cycle Computer, 01050, Navigation Computer |
