SHXTLT01 LED Grave Light with Timer Instruction Manual

Safety Instructions
Read the operating instructions carefully and follow the safety guidelines to prevent personal injury or property damage. Keep out of reach of children and animals.

Handling:
Handle the product with care to avoid damage from impacts or falls. Protect from extreme temperatures and mechanical loads.

Ambient Conditions:
Avoid exposure to heavy impacts, flammable substances, or extreme temperatures. Product is splash-proof but should not be immersed in water.

Battery Installation:

Remove the protective cap.
Insert batteries according to the correct polarity.

Operation Modes:
Choose between TIMER (ON: 6 hours, OFF: 18 hours), OFF, and ON (always switched on).

Cleaning Instructions:
Use a lint-free cloth to clean the product. Do not use harsh chemicals or immerse in water.

Recycling and Disposal:
Dispose of packaging materials thoughtfully in sorted waste for recycling. Do not attempt to repair the product yourself.

FAQ

Can the LED grave light be left outdoors in all weather conditions?
The product is splash-proof and designed for outdoor use, but avoid extreme weather conditions like heavy rain or snow.

How long do the batteries last in the TIMER mode?
In TIMER mode, the LED grave light will be ON for 6 hours and OFF for 18 hours, providing extended battery life.

Intended use

This product is an LED candle light that is usually placed on or near graves. It offers the following features:

Batteries can be replaced.
There are three operating modes to choose from (TIMER/OFF/ON).

The light simulates the flickering effect of a real candle.
The product fulfils all legal, national and European requirements. For safety and certification reasons, it is not permitted to modify or change the product. Improper use for purposes other than those intended can lead to damage and harbour risks. Please read the operating instructions carefully and keep them in a safe place. Only pass the product on to others together with the operating instructions. All company and product names are the property of their respective owners. All rights reserved.

Scope of delivery

LED grave light

Operating instructions

Current operating instructions

Download the latest operating instructions via the link www.shx.at/downloads or scan the QR code shown. Follow the instructions on the website

Safety instructions

Read the operating instructions carefully and pay particular attention to the safety instructions. If you do not follow the safety instructions and information on proper handling in these operating instructions, we accept no liability for any resulting personal injury or damage to property. In such cases, the warranty/guarantee will also become void.

General

This product is not intended as a toy. Keep it out of the reach of children and animals.

Do not dispose of packaging materials thoughtlessly, as they could pose a danger to children.
If you have any questions that are not answered by these operating instructions, please contact our technical support or qualified specialist personnel.

Handling
Always handle the product with care. Even light impacts, knocks or a fall from a low height can cause damage.

Ambient conditions

Avoid exposing the product to mechanical loads.
Protect the product from extreme temperatures, heavy impacts and flammable gases, vapours and solvents.
Note: The housing of this product is designed in accordance with protection class IP44. It is splash-proof and therefore suitable for outdoor use. Do not immerse it in water.
If safe operation is no longer possible, take the product out of operation and protect it from unintentional use. Do NOT attempt to repair the product yourself. Safe operation is no longer guaranteed if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under unfavourable environmental conditions for a longer period of time or
- was exposed to considerable transport loads.

Battery

Ensure that the batteries are inserted correctly according to polarity.
If the product is not to be used for an extended period of time, the batteries should be removed to prevent leakage and any resulting damage. Contact with leaking or damaged batteries can cause skin burns. Use protective gloves when handling damaged batteries.
Store batteries out of the reach of children and pets and avoid leaving them lying around to minimise the risk of swallowing.
When replacing the batteries, all of them should be replaced at the same time. A combination of old and new batteries can lead to leaks and damage the product.
Batteries should not be dismantled, short-circuited or thrown into a fire. Non-rechargeable batteries must not be charged as this poses a risk of explosion!

Inserting the batteries:

Start by removing the protective cap.
Carefully remove the cover of the candle light to gain access to the battery compartment.
Insert the batteries into the battery compartment, observing the correct polarity.
Reassemble all components and replace the protective cap.

It is advisable to select the desired setting before refitting the protective cap.

Operation

Choose between the following operating modes: TIMER (ON: 6 hours, OFF: 18 hours), OFF and ON (always switched on).

Cleaning instructions

Do not use aggressive cleaning agents, cleaning alcohol or other chemical solutions, as these can damage the housing and lead to product faults.

The product should not be immersed in water.
It is best to use a dry, lint-free cloth to clean the product.

Recycling, disposal, declaration of conformity

RECYCLING
The packaging materials can be recycled. It is therefore recommended to dispose of them in sorted waste

DISPOSAL
The “crossed-out wheelie bin” symbol requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment may contain hazardous and environmentally harmful substances. Therefore, do not dispose of them in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. This will help to protect resources and the environment. For further information, please contact your dealer or the local authorities. Directive 2012/19/EU

DECLARATION OF CONFORMITY
We hereby confirm that this product complies with the essential requirements, regulations and directives of the EU. You can view the detailed declaration of conformity at any time under the following link:
https://www.schuss-home.at/downloads.

Technical data

Power supply: 2 x LR14 batteries (type C)

Operating modes: TIMER, OFF, ON
Timer: 6 hours ON, 18 hours OFF
Brightness: 3 lm

Colour temperature: 2700 K (warm)
Max. LED service life: 10000 hours
Power consumption: 0.06 W

Operating/storage temperature: -20 to +40 °C
Dimensions: 70 x 70 x 120 mm
Weight (approx.): 78 g

Documents / Resources

SHX SHXTLT01 LED Grave Light with Timer [pdf] Instruction Manual
SHXTLT01, SHXTLT01 LED Grave Light with Timer, LED Grave Light with Timer, Grave Light with Timer, Light with Timer, Timer

References

User Manual

SHXTLT01 LED Grave Light with Timer

Product Specifications

Product Usage Instructions:

FAQ