Shelly Button logo

Wiring guide

Shelly Button logo 1

Button 1

Max Voltage 260V AC
Max load 11A
Working temp -20 up to 40C
Protection IP47

WithShelly Button 1

Step 1Shelly Button 1 - fig 10

Connect the wires, as shown on the picture above.
Step 2Shelly Button 1 - fig

Place the button extension lead, as shown on the picture above.
Step 3Shelly Button 1 - fig 2

Connect the power (input and output) cables, as shown on the picture above.
Step 4Shelly Button 1 - fig 3

Inside the case of Shelly Button there are guiding arrows, which show how to organise the power cables. After placing the cables, they should look as shown on the picture above.
Step 5Shelly Button 1 - fig 8

Put the screws in the holes, shown on the picture above and tighten the top and botton parts of Shelly Button.
Wiring guide

Max Voltage 260V AC
Max load 11A
Working temp -20 up to 40C
Protection IP47

Shelly Button 1 - fig 9

Step 1Shelly Button 1 - fig 10

Connect the wires, as shown on the picture above.
Step 2Shelly Button 1 - fig 11

Place the button extension lead, as shown on the picture above.
Step 3Shelly Button 1 - fig 13

Connect the power (input and output) cables, as shown on the picture above.
Step 4Shelly Button 1 - fig 16

Inside the case of Shelly Button there are guiding arrows, which show how to organise the power cables. After placing the cables, they should look as shown on the picture above.
Step 5Shelly Button 1 - fig 146

Put the screws in the holes, shown on the picture above and tighten the top and botton parts of Shelly Button.

Documents / Resources

Shelly Button 1 [pdf] User Manual
Button 1

References

Leave a comment

Your email address will not be published. Required fields are marked *