Wiring guide
| Max Voltage | 260V AC |
| Max load | 11A |
| Working temp | -20 up to 40C |
| Protection | IP47 |
With
Step 1
Connect the wires, as shown on the picture above.
Step 2
Place the button extension lead, as shown on the picture above.
Step 3
Connect the power (input and output) cables, as shown on the picture above.
Step 4
Inside the case of Shelly Button there are guiding arrows, which show how to organise the power cables. After placing the cables, they should look as shown on the picture above.
Step 5
Put the screws in the holes, shown on the picture above and tighten the top and botton parts of Shelly Button.
Wiring guide
| Max Voltage | 260V AC |
| Max load | 11A |
| Working temp | -20 up to 40C |
| Protection | IP47 |
Step 1
Connect the wires, as shown on the picture above.
Step 2
Place the button extension lead, as shown on the picture above.
Step 3
Connect the power (input and output) cables, as shown on the picture above.
Step 4
Inside the case of Shelly Button there are guiding arrows, which show how to organise the power cables. After placing the cables, they should look as shown on the picture above.
Step 5
Put the screws in the holes, shown on the picture above and tighten the top and botton parts of Shelly Button.
Documents / Resources
 |
Shelly Button 1 [pdf] User Manual Button 1 |
