Product Specifications:
- Model: RC3
- Manufacturer: Sena Technologies, Inc.
- Website: www.sena.com
Product Usage Instructions:
Installation:
There are three ways of installing the RC3:
- Using the Clip:
- Step 1: [Detailed instructions here]
- Step 2: [Detailed instructions here]
- Using the Adhesive Tape:
- Using the Hook and Loop Fasteners:
- Hook Fastener: [Detailed instructions here]
- Loop Fastener: [Detailed instructions here]
Battery Slot: [Detailed instructions here]
There are various button operations for the RC3:
- Tap: [Description of tapping]
- Tapping: [Description of tapping]
- Double Tapping: [Description of double tapping]
- Press for 1 sec: [Description of long press]
Power On/Off:
- Power On: Tap Center Button
- Deep Sleep: Press + Button and Center Button
Battery Check:
Battery status can be checked by the Status LED as follows:
- 70 ~ 100% – [Description]
- 30 ~ 70% – [Description]
- 0 ~ 30% – [Description]
Factory Reset:
To perform a factory reset, press + Button, Center Button, and –
Button simultaneously.
Bluetooth Pairing:
To pair via Bluetooth, press + Button 8 times.
Headset Control:
To control your headset using the RC3, refer to the Quick
Reference Guide for button operations on phone, music, and intercom
functions.
Frequently Asked Questions (FAQ):
Q: How do I check the battery status of the RC3?
A: The battery status can be checked by observing the Status LED
which indicates different battery levels.
Q: How do I perform a factory reset on the RC3?
A: To perform a factory reset, simultaneously press the +
Button, Center Button, and – Button.
RC3 Quick Start Guide
Battery Release Hole
(+) Button
Center Button
(-) Button
Installation
There are three ways of installing the RC3.
Using the Clip
1
2
Using the Adhesive Tape
Battery Slot
Getting Started
Using the Hook and Loop Fasteners
1
Hook Fastener
2 Loop Fastener
Note:
· When closing the battery slot, insert both ends of the rubber first.
· To remove the battery, insert a paper clip through the Battery Release Hole.
16.Aug
1
2
3
Button Operation
Tap Tapping Tap Double Tapping 1″ Press for 1 sec
Power On/Off
Power On
Tap Center Button
Deep Sleep
+ (+) Button
Center Button
1″ Press
4
Battery Check
Power On
Status LED
70 ~ 100%
– …
30 ~ 70%
– …
0 ~ 30%
– …
Factory Reset
+
+
(+) Button
Center Button
(-) Button
1″ Press
Bluetooth Pairing
(+) Button
8″ Press
Pairing
Headset
Remote Control Pairing
Note:
· You can control the headset using the RC3 only after you pair them together.
· The RC3 supports Sena headsets with Bluetooth 4.1.
5
Headset Control
To control your headset using the RC3, please refer to the Quick Reference Guide for button operations on functions such as phone, music, and intercom.
Sena Technologies, Inc. www.sena.com Customer Support: support.sena.com E-mail: support@sena.com
Documents / Resources
 |
SENA RC3 3 Button Remote for Bluetooth Communication System [pdf] User Guide RC3 3 Button Remote for Bluetooth Communication System, RC3 3, Button Remote for Bluetooth Communication System, Bluetooth Communication System, Communication System |