Specifications
- Model: RC3
- Manufacturer: Sena Technologies, Inc.
- Website: www.sena.com
PRODUCT OVERVIEW
Getting Started
Note:
- When closing the battery slot, insert both ends of the rubber first.
- To remove the battery, insert a paper clip through the Battery Release Hole.
Installation
- There are three ways of installing the RC3.
- Using the Clip
Using the Hook and Loop Fasteners
Using the Adhesive Tape
Power On/Off
Battery Check
Bluetooth Pairing
Note:
- You can control the headset using the RC3 only after you pair them together.
- The RC3 supports Sena headsets with Bluetooth 4.1.
Factory Reset
Headset Control
To control your headset using the RC3, please refer to the Quick Reference Guide for button operations on functions such as phone, music, and intercom.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: support@sena.com
Frequently Asked Questions
Q: How do I check the battery status of the RC3?
A: The battery status can be checked by observing the Status LED which indicates different battery levels.
Q: How do I perform a factory reset on the RC3?
A: To perform a factory reset, simultaneously press the + Button, Center Button, and - Button.
Documents / Resources
 | SENA RC3 3 Button Remote for Bluetooth Communication System [pdf] User Guide RC3 3 Button Remote for Bluetooth Communication System, RC3 3, Button Remote for Bluetooth Communication System, Bluetooth Communication System, Communication System |