Scosche Industries BL2AW BaseLynx 2.0 Modular Charging System
INCLUDED ELEMENTS
- A. Magnetic Charger for Apple Watch
- Displays and charges all Apple Watch models
- Stand is compatible with all watch band types
- B. Protective End Cap with Integrated AC Power Cord
- C. Protective End Cap
DEVICE SETUP
- Place the power cord end cap on the charger module.
- Place the other end cap on the charger module.
- Plug the power cord into a wall socket
- Place Apple Watch on the magnetic charger.
BASELYNX POINT SYSTEM
If you decide to expand your charging station with more Baselynx 2.0 modules just follow the simple point system to safely build your ultimate charging station.
Each Baselynx module has a predetermined point value as shown in the chart below. To ensure safe and dependable operation do not exceed 15 points.
(Note: The Baselynx 2.0 Watch is 1 point)
For questions regarding different configuration options and other product support, contact Scosche Customer Service at 800-363-4490 ext. 1 or customerservice@scosche.com
SAFETY WARNINGS
NOTES
- If the device’s battery is fully discharged it may take a few minutes for it to show that it is charging.
- Devices and Baselynx 2.0 modules may get warm during charging. This is completely normal, and they will gradually cool down after they are fully charged.
- Charging time may vary based on the device’s battery capacity, charge level, the condition of the battery and the temperature in the surrounding area.
- To clean your Baselynx, disconnect it from power and wipe with a slightly damp cloth.
WARNINGS
- For indoor use in dry locations only.
- Children should be supervised when using this product
- Do not operate if any part of product appears to be damaged
- Do not attempt to service. Opening housings will expose you to dangerous voltage and risk of electrical shock.
SPECIFICATIONS
- AC Input 100-240V~50/60Hz, 2.5A
- AC Output 100240V~50/60Hz, 15A
- Wireless Charging Output 5.0V= 1A, SW
Scosche Industries
1550 Pacific Avenue
Oxnard, California 93033
Phone 800-363-4490 x1 / 805-486-4450 x1
www.scosche.com
©2023 Scosche Industries
Scosche & Baselynx are trademarks of Scosche Industries. Other marks or brands are the property of their respective owners. Devices and or appearance may vary.
Designed in Oxnard, California
SI BL2AWWT-AP 11 /23
BL2AWWT-XV 11 /23
BL2AW 11 /23
Documents / Resources
 |
Scosche Industries BL2AW BaseLynx 2.0 Modular Charging System [pdf] Owner's Manual IKQBL2AW, IKQBL2AW, BL2AW BaseLynx 2.0 Modular Charging System, BL2AW, BaseLynx 2.0 Modular Charging System, Modular Charging System, Charging System, System |
