SCANSTRUT SPR-7-RM Scan Pod Installation Instructions
Specifications:
- Product Name: Scanstrut Scanpod Rail Mount Helm Pod
- Model Numbers: SPR-7-RM, SPR-7S-RM, SPR-8-RM
- Parts List:
- Pod Back – 108111
- Pod Front – 178113
- Bracing Plate – 620526
IMPORTANT
- Pods are only compatible with marine electronics devices as stated in the latest Scanstrut Product guide – subject to change without prior notice.
- Use with unapproved products or overloading, invalidates any warranty.
- No liability is accepted for damage caused by incorrect installation.
- The installation and assembly must be regularly inspected for evidence of damage or loose parts.
- The product has been designed specifically for the mounting of approved marine electronics devices and used under normal boating conditions.
- For installations that differ from those stated here, please consult Scanstrut’s head office.
Parts List
Tools Required
Installation
Scanstrut Ltd
5 Darts Business Park, Clyst St. George, Exeter, Devon, EX3 0QH
Tel: +44(0)1392 531280
E-mail: sales@scanstrut.com
Website: www.scanstrut.com
FAQs
Q: Can I use different screws for installation?
A: It is recommended to use the specified screws for secure installation and optimal performance.
Q: What is the recommended distance between the Pod Back and Pod Front?
A: The recommended distance is R MIN 82mm (3.23 inches) as indicated in the installation diagram.
Documents / Resources
 |
SCANSTRUT SPR-7-RM Scan Pod Installation Instructions [pdf] Instruction Manual SPR-7-RM, SPR-7S-RM, SPR-8-RM, SPR-7-RM Scan Pod Installation Instructions, SPR-7-RM, Scan Pod Installation Instructions, Installation Instructions, Instructions |
