Ruijie 1267 Mbps Wall Mounted Access Point
User Manual
Packing List
| Item | Name | Quantity | Unit |
| 1 | Host | 1 | Set |
| 2 | User Manual | 1 | Copy |
| 3 | Warranty card | 1 | Copy |
| 4 | Mounting Screw | 2 | Piece |
Appearance and Interface
Top View
Note:
- System LED indicator
- LAN port
- Reset button
RearView 
Note:
1 WAN/PoE Port
When powering 1he AP through PoE, connect one end of 1he Ethernet cable to the WAN/PoE port and the other end to a PoE-capable device.
| LED Indicator and Button | Frequency | Description |
| LED Indicator | Solid blue | Normal operation. |
| Off | The AP not receiving power. | |
| Blinking(0.5Hz) | Normal operation, but the AP is not connected to Ruijie Cloud. | |
| Fast blinking(10Hz) | Possible cases:
|
|
| Reset Button | Press for less than2 seconds | Restart the device. |
| Press for more than 5 seconds | Restore the factory settings. |
Product Installation
- Loosen screws on the 86-type faceplate that is mounted on the wall.
- Connect the Ethernet cable to the WAN/PoE port.
- Align screw holes on both sides of the device over those on the faceplate. And then tighten screws with a screwdriver.
- Install the plate cover in the way as shown in the figure.
Network Configuration
- Method 1 (Recommended)
Scan the QR-code on the manual or device to download Ruijie Reyee App, and configure the network according to App.
- Method 2
Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and @Ruijie-sxxxx when there is only one device), or connect the cable with LAN port, and visit http://10.44.77.253 (default password: admin). It is recommended to configure the IP address as 10.44.77.250.
Documents / Resources
 |
Ruijie 1267 Mbps Wall Mounted Access Point [pdf] User Manual 1267 Mbps Wall Mounted Access Point, 1267, Mbps Wall Mounted Access Point, Mounted Access Point, Access Point |
