RoHS Bluetooth Headband

Feature

• 5.0 Bluetooth Version. Compatible with any Bluetooth enabled devices
• Made from premium material to keep you soft
• Built-in microphone for answering or calling
• Hand- washable after removing the Bluetooth modules
• 30-day money back guarantee and 24 hours friendly customer service

Specifications

• Bluetooth Version: V 5.0+ EDR
• Transmission Distance: 33ft(10m)-65ft(20m). Best performance without obstacles
• Rechargeable Lithium Battery: 200mAH
• Micro USB Charge: 5V/0.5A
• Charging Time: 1.5-2 hours
• Working Time: 10-12 hours
• Package Included: Bluetooth Headband x1, Charing Cable x1, User Manual x1, Customer Service Card x1

Function Summary

1. LED Status Light
2. Volume Down  Previous Track
3. On / Off / Play / Pause / Answer
4. Volume Up / Next Track
5. Charging Port

Control

Power On/Off		Press and hold for 3 seconds
Play/Pause Music		Press once
Volume Up/Down		Press and hold during music playing
Previous Track		Press once
Next Track		Press once
Answer/End Phone Call		Press once when phone ringing
Reject Call		Press and hold for 3 seconds
Switch to Mobile Device		Press and hold for 3 seconds

Connect to Bluetooth Headband

1.Turn on Bluetooth on device

 2.Turn on the Bluetooth Headband

3.Connect to Bluetooth (Name: BT-FAAH) on device

LED Color     >    Status
Rapidly flashing blue and red    >       Pending to be Connected
Slowly flashing blue       >         Connected

When turned on, the Bluetooth Headband w-ill automatically connect to the last connected device if available. If no previously paired device detected, it will keep pairing mode.
Warning: Only one Bluetooth connection is allowed, if user want to connect to another device, please make sure to cancel the previous device.

Charge the Bluetooth Headband

How to wash the Bluetooth Headband?
Please note that you MUST remove the control panel & speaker before washing the Bluetooth Headband. Follow the steps below

Warm reminder

• Do not expose Bluetooth Headband to liquid or moisture.
• Do not store Bluetooth Headband near acidic or alkaline material.
• Do not keep Bluetooth Headband close to the fire. Do not tumble dry.
• Please remove the Bluetooth module before washing. After completely dried, put back to their original position.
• Please charge the Bluetooth Headband when you receive it.
• Please turn off Bluetooth function to save power when not working.
• Please note that a ‘DI DI DI’ sound will be heard when reaches max/min volume level.
• Please fully charge before traveling or going out.
  

Documents / Resources

RoHS Bluetooth Headband [pdf] User Manual Bluetooth Headband

References

• User Manual