REGIN RC-C3DFOC Pre Programmed Room Controllers
Specifications:
- Model: REGIO RC-C3DFOC
- Power Supply: 1- or 3-phase, 24 V AC
- Features: Temperature sensor, Condensation detector, Modbus EXOline BACnet, Presence detector, Window contact, EC fan, CO2 sensor, SCADA
- Certification: CE mark
Product Usage Instructions
- Installation:
Ensure that the installation complies with local safety regulations. - Commissioning:
Refer to the manual “Regio Midi Manual” for information on commissioning the product. The manual is available for download from www.regincontrols.com.
FAQ:
- Q: Where can I find more information about the product?
A: For more information, visit www.regincontrols.com or contact info@regin.se.
REGIO RC-C3DFOC
- Box 116, SE-428 22 Kållered, Sweden
- Tel: +46 31 720 02 00,
- Fax: +46 31 720 02 50
- www.regincontrols.se,
- info@regin.se
Ensure that the installation complies with local safety regulations. Information about commissioning of the product can be found in the manual ”Regio Midi Manual”, which is available for download from www.regincontrols.com .
Instructions
This product carries the CE mark. For more information, see www.regincontrols.com.
Documents / Resources
 |
REGIN RC-C3DFOC Pre Programmed Room Controllers [pdf] User Manual RC-C3DFOC Pre Programmed Room Controllers, RC-C3DFOC, Pre Programmed Room Controllers, Programmed Room Controllers, Room Controllers, Controllers |
