Rayrun BR03-11 LED Remote Controller
Function
Pair and unpair
The remote controller needs to be paired to the receiver to work. Users can pair up to 5 remote controllers to one receiver and each remote controller can be paired to any receiver.
To pair or unpair the remote to the receiver, please operate with the following steps:
- Cut off the power of the receiver and power it on again after more than 5 seconds.
- Press remote
and key simultaneously and briefly within 10 seconds after the receiver is powered on. - Release all keys, then press
key within 10 seconds to pair the remote to the receiver. - To unpair the remote from the receiver, do step 1-2 first, then release all keys and press
key within 10 seconds.
Specification
- Working voltage DC 3V, CR2032 battery
- Wireless protocol Umi protocol based on SIG BLE Mesh2.4GHz ISM band
- Frequency band < 7dBm
- Wireless power < 7dBm
- Working temperature –20-55 C(-4-131 F)
Documents / Resources
 |
Rayrun BR03-11 LED Remote Controller [pdf] User Manual BR03-11 LED Remote Controller, BR03-11, LED Remote Controller, Remote Controller, Controller |
