Rawlplug DF269A0B Sanitary Fixing Kit Basin Fixing

 

Specifications

• Basin: 1 piece
• Bolt: 4 pieces
• Nut: 4 pieces
• Metal Washer: 4 pieces
• Expansion Screw Plastic: 4 pieces

Product Usage Instructions

Components Assembly

1. Place the Basin on a flat surface.
2. Attach the Bolts and Nuts to the Basin using the Metal Washers.
3. Secure the Basin by using the Expansion Screw Plastics.

Installation

1. Before fixing the Basin in place, ensure that it is sitting level.
2. Add bolts to the plasterboard for additional support.

Mounting

1. Add battens to the wall before installation to provide stability.
2. Secure the Basin (side) using the Expansion Screw Plastics, Bolts, Metal Washers, and Nuts.

FAQ

• Q: How do I ensure the Basin is level before installation?
• A: Use a spirit level to check if the Basin is sitting evenly on a flat surface.
• Q: Can I use additional bolts for mounting on a different surface?
• A: Yes, you can add bolts to a plasterboard for secure mounting.

ComponentsINSTALLATION INSTRUCTION

1. Note: Product can be mounted on both concrete or timber-framed walls
2. Important! Before installing, ensure there is sufficient timber framing in the wall to securely fasten your basin to.
3. Before fixing the basin in place, ensure that the basin is sitting level.
4. Screw a metal nut onto each fixing bolt to secure the basin.
   Caution: do not over-tighten as this may damage the basin/top.

Documents / Resources

Rawlplug DF269A0B Sanitary Fixing Kit Basin Fixing [pdf] Installation Guide DF269A0B Sanitary Fixing Kit Basin Fixing, DF269A0B, Sanitary Fixing Kit Basin Fixing, Fixing Kit Basin Fixing, Kit Basin Fixing, Basin Fixing, Fixing, Fixing

References

• User Manual