QSFPTEK SFP28 Series Coding Box User Guide

Driver Installation:
Connect the computer and Coding Box with the USB cable. The green light indicates successful connection.
Open the ‘USB Driver’ folder and run ‘USBXpressInstaller’ as an administrator.
After successful installation, restart your computer.

Transceiver Coding
Open the ‘Coding folder’ and launch the ‘CodingX’ software.
Insert the module into the Box. The red light indicates a successful connection between the module and the Code Box.
CodingX will display the module log on the left side upon successful connection.

Config Button Introduction: Module type: The system automatically recognizes speeds from 1G
to 100G.
- Data range: Choose the appropriate ‘A0+A2’ code position information.
- Select Pwd: Choose the password corresponding to the module model.
- Open code: Click ‘Open code’ to select the code source.
- Write: Click ‘Write’ to finish transceiver coding. A ‘Success’ or ‘Fail’ message will be displayed accordingly.

Support and Other Resources

FAQ

Q: What transceiver types are supported by the QSFPTEK Coding Box?
A: The QSFPTEK Coding Box supports SFP, SFP+, X FP, SFP28, QSFP+, QSFP28, and QSFP-DD transceiver modules.

Introduction

QSFPTEK coding box can be used for coding, encoding, writing, and testing a full range of optical transceiver modules, including SFP, SFP+, SFP28, XFP, QSFP+, QSFP28, QSFP-DD, etc. This programming coding board is industry-leading in comprehensive performance with auto-sensing and auto-code writing functions.
We appreciate your decision to select QSFPTEK coding box. This manual is intended to help you to config the optical module with the QSFPTEK coding box.

Supported Transceiver Type

QSFPTEK Coding Box Operation Guide

Tools Preparation

Operation Guide

Driver Installation

Connect the computer and Code Box with USB cable (The green light indicates successful connection)
Open the ‘USB Driver’ folder-USBXpressInstaller, Choose ‘Run as administrator’
After successful installation, please restart you computer

Transceiver Coding

Open the ‘Coding folder’, Open the ‘CodingX’ software
The display interface after opening CodingX
Insert the module into BOX (the red light indicates successful module and Code Box connection)
After connection successful, the CodingX will display the module log in the left side

Important Config Button Introduction by Operation Order:

Module type: The system automatically recognizes speeds from 1G to 100G
Data range: Choose the appropriate ‘A0+A2’ code position information
Select Pwd: Choose the password corresponding to the module model
Open code: Click ‘Open code’ to select the code souce
Write: Click ‘Write’ to finish transceiver coding
‘Success’ will be displayed if writing is successful, and ‘Fail’ if writing is failed

Support and Other Resources

Contact us https://www.qsfptek.com/company/contact-us.html
Customer Success https://www.qsfptek.com/resources/customer-success-stories

Email support@qsfptek.com

Product Warranty

The QSFPTEK Box products are backed by a 3-year limited warranty supported by QSFPTEK.
For more details about applying qualifications, please live chat or email sales@qsfptek.com for support.
3 Year Warranty

Documents / Resources

QSFPTEK SFP28 Series Coding Box [pdf] User Guide
SFP28 Series Coding Box, SFP28 Series, Coding Box, Box

References

User Manual

QSFPTEK SFP28 Series Coding Box

Product Information

Product Usage Instructions