Pyle PDKWM806B Portable UHF Wireless Microphone System
Portable UHF Wireless Microphone System – Battery Operated Dual Bluetooth Cordless Microphone Set, Includes 2 Handheld Transmitter Mic, Mixer Receiver, RCA, for PA Karaoke DJ Party – Pyle PDKWM806B
In contrast to other low-grade VHF units, the portable wireless mic set has UHF audio transmission for unmatched performance with high signal-to-noise ratio for clear, noise and distortion-free, crisp vocal & outstanding sound reproduction. The Bluetooth streaming capability of the wireless portable microphone is compatible with the newest gadgets. Additional features include built-in acoustic pop filter, dual fixed frequency, EQ settings, and multisource audio signal combining capability. The receiver operates simply by plugging it into a power outlet, while the dual microphones are powered by two AA batteries.
allows you to adjust each channel’s volume independently so you can balance the vocals as you see fit. The audio mixer receiver includes RCA audio and video signal input/output, 2 14″ wired microphone inputs, and a back panel 14″ mixed output. The UHF wireless microphone is perfect for DJ sound, house party audio, karaoke, and speech. The wireless professional microphone is equipped with a mixer receiver, two handheld transmitter microphones, a power converter, two audio + video 3RCA cables, and four AA batteries. can be applied to both residential and corporate purposes. Type of Connector: 3.5 mm Jack Battery-powered power source.
Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference.
CAUTIONS
- Do not use the unit underwater, don’t expose it to rain. Please store it in a cool, dry place.
- Please use and store it at normal temperature. Do not move it from overheated to supercooled condition frequently as well as keep away from heat sources such as heater and oven.
- When using and storing, please pay attention to dust and moisture.
- Be careful to violent collisions.
- To avoid acoustical feedback, do not hold the microphone close to the loudspeakers.
- For the best sound, pick-up pattern do not hold your hand against the microphone head.
- Remove the batteries from the battery compartment when the device is not used for a long time.
FEATURES
- Hassle-Free Wireless Microphone System
- Multi-Source Audio Signal Mixing Ability
- Control Audio Levels from External Devices
- Mixer Receiver System for Convenient Sound Level Adjustment
- Wireless BT Music Streaming Ability
- Dual Fixed Frequency System Design
- Adjustable Rotary Controls: Echo, Tone, Volume: Mic 1, Mic 2
- Wired Microphone Support
- (2) 1/4’’ Mic Inputs
- RCA Audio (L/R) & Video Signal Input/Output Jacks
- Rear Panel 1/4’’ Mixed Output
- Adjustable Antennas for Extended Wireless Range
- Includes Handheld Wireless Microphones
- Rugged Microphone Construction & Steel Mesh Grill
- Convenient ON/OFF/MUTE Power Switch
- Battery Operated Mic, Requires (2) ‘AA’ Batteries, Included
- Ultra-Wide Frequency Range
- Built-in Acoustic Pop Filter
- Ideal for speech, Karaoke, DJ Sound & House Party Audio
WIRELESS BT CONNECTIVITY
- Simple & Hassle-Free Pairing
- Works with All of Your Favorite Devices (Smartphones, Tablets, Laptops, Computers, etc.)
- Wireless BT Network Name: ‘PYLEUSA’
- Wireless BT Version: 4.2
- Wireless BT Range: 60’ ft
WHAT’S IN THE BOX
- Audio Mixer Receiver
- Wall Power Adapter
- 1/4’’ Audio Cable
- 5mm to 2RCA Audio Cable
- (2) Audio + Video (3RCA) Cables
- (2) Handheld Microphones
- (4) ‘AA’ Batteries
TECHNICAL SPECS
- UHF FIXED FREQUENCY: S12: 517.6MHz(F1) +521.5MHz(F2); S34: 533.7MHz(F3)+537.2MHz(F4)
- WIRELESS OPERATION RANGE: Up to 165’+ ft.
- MODULATION MODE: FM
- MAXIMUM DEVIATION: +/-75KHz
- FREQUENCY RESPONSE: 80-18kHz (+/-3dB)
- FREQUENCY STABILITY: 20ppm
- AUDIO DYNAMIC RANGE: >90dB
- S/N RATIO: >95dB
- H.D: <0.5%
- MIRROR IMAGE REJECTION: >50dB
- LINE INPUT SENSITIVITY: 380mV/-8.5dB
- MIC INPUT SENSITIVITY: 5mV/-46dB
- LINE INPUT IMPEDANCE: 20 KO
- MIC INPUT IMPEDANCE: 600O
- RECEIVER POWER SUPPLY: 110/240V (18V/500mA Power Adapter)
- MIC ELEMENT: Dynamic
- ANTENNA: Built-in Housing
- RF OUTPUT: <10mW
- SPURIOUS EMISSION: <-40dB
- Battery Operated Mic, Requires (2) ‘AA’ Batteries Each
- CURRENT DISSIPATION: <120mA
- MICROPHONE DIMENSIONS (L X D):6’’ x 1.5’’ (Each)
- BASE RECEIVER DIMENSIONS (L X W X H):3’’ x 4.4’’ x 1.7’’
HANDHELD MICROPHONE
- Grille (capsule inside)
- Power/low battery Indicator
- Power ON/OFF/MUTE Switch
- Battery Compartment/Cover
OPERATION
- Open battery cover. Install the provided 2pcs 1.5V AA batteries and then close the cover. Pay attention to the correct polarity.
- Slide power switch to “ON” position to turn on the microphone. Power indicator will flash once and then go off. This indicates correct operation.
- Now receiver RF indicator should light. Please confirm frequency of microphone same as the receiver before operation.
- Slide power switch to center “MUTE” position to mute the sound.
- During operation if power indicator lights red, this indicates the battery is low. Please replace new battery.
- If the microphone is not going to be used for any length of time, please slide power switch to OFF position and remove the battery.
RECEIVER
FRONT PANEL
REAR PANEL
- Main Power: Press to switch the unit power to ON and OFF.
- ECHO: Rotate the echo knob to your desired level.
- RF 1: The indicator will light red when wireless microphone 1 is on.
- AF 1: The indicator will light green when speak to wireless microphone 1.
- BT: When main power is ON, the indicator will flash blue fast to be ready to connect BT audio device. After BT audio device is connected the indicator will light constant blue. When audio device is playing the indicator will flash blue slowly.
- RF 2: The indicator will light red when wireless microphone 2 is on.
- AF 2: The indicator will light green when speak to wireless microphone 2.
- W/MIC 1: Rotate to adjust the volume of the wireless microphone 1 and wired dynamic MIC 1.
- W/MIC 2: Rotate to adjust the volume of the wireless microphone 2 and wired dynamic MIC 2.
- TONE: This control is used to adjust the bass, treble quality of the microphone sound. The bass is decreased and treble is increased when the control turned clockwise. The bass is increased and treble is decreased when the control turned counter clockwise.
- MUSIC: Rotate to adjust the volume of music.
- MIC IN 1: Insert the 6.3mm plug of wired dynamic MIC into MIC 1 Jack.
- MIC IN 2: Insert another 6.3mm plug of wired dynamic MIC into MIC 2 Jack.
- B: Receiving antenna of the wireless microphone 2.
- Video input jack (RCA type): Connect this RCA Jack to DVD, Streamer, Set-Top Box or any other A/V source for video in.
- Audio input jack (RCA type): Connect this set of RCA Jack to DVD, Streamer, Set-Top Box or any other A/V or Audio source for audio in.
- Video output jack (RCA type): Connect this RCA Jack to TV or Screens for video out.
- Audio output jack (RCA type): Connect this set of RCA Jack to Active Speakers, Hi Fi system for audio out(mixed music and MIC signal).
- AF OUT (6.35): Alternatively connect this jack to MIC IN of your amplifier for audio out (mixed music and MIC signal).
- DC IN: Connect DC jack of supplied AC / DC adapter to this jack.
- A: Receiving antenna of the wireless microphone 1.
OPERATION
- Connect the receiver to A/V source, Speaker and TV (refer to CONNECTION OF RECEIVER). Then connect the provided AC/DC adapter to the receiver and turn the receiver power on.
- Turn the microphones power on. RF indicators on receiver will light.
- Turn on your AV source, Speaker and TV or other Screen.
- Adjust Tone, Echo, MIC volume and Music volume to your desired level.
- Now you are ready to sing!
RECEIVER CONNECTION
AUDIO INPUT
You can bring in the music either via Bluetooth or from RCA input on back.
WIRELESS BT STREAMING INPUT
To play music from your Smartphone etc. via BT, turn on Wireless BT function of your Smartphone and search for “PYLEUSA” and connect.
No password is required. Then you can play music in your Smart phone.
RCA INPUT ON BACK
Connect audio source to RCA input jack on the back of receiver with the provided RCA/RCA cables(white and red) if your audio source has RCA output, such as DVD player, Set-Top Box, etc. 
Or connect audio source to RCA input jack on the back of receiver with the provided 3.5mm to RCA cables if your audio source has 3.5mm phone out, such as iPad, Smartphones, Tablets, Laptops, Computers, etc.
AUDIO OUTPUT
Both the ¼ inch AF OUT jack and the L/R RCA output jacks on the back of receiver output the final mix of music and microphone. To output the sound you need to have an additional audio device (speaker, Hi Fi system).
Connect the ¼ inch AF OUT jack on the back of receiver to MIC input jack on amplifier with supplied ¼ inch cable. Or connect the L/R RCA output jacks on back of receiver to L/R RCA input jacks on active speaker with supplied RCA cables.
VIDEO INPUT AND OUTPUT
Along with the L/R audio input/output jacks, there is a video input and output jack on the back of receiver. Connect video output of AV source such as DVD player, Set-Top Box etc. to video input on the back of receiver with the provided RCA video cable(yellow). Connect video input of TV or other Screen to video output on the back of receiver with another RCA video cable (provided).
REMARKS
Video input and output on the back of receiver is just a pass through of video from AV source to TV or Screens. You can also connect video output of AV source directly to video input of TV or other Screen.
FCC RULES AND REGULATIONS
This device complies with Part 15, Subpart B of FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interference that is received, including any interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FAQs
Are microphones fit regular size of the mic stand?
yes the mic will fit a regular microphone stand.
is there output or do u need speakers also?
It goes thru my receiver.
Can I power the receiver with a 12 volt battery?
unfortunately no. It needs to be connected to a 110 or 220 volts power source. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDKWM806B.
Plastic mic?
it is a combination of plastic and metal. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDKWM806B for more details.
Can I use a reachable battery to microphones?
Yes, as long as the batteries are the correct type (in this case AA), you can use rechargeable batteries.
Can you connect multiple speakers?
I connect this into a receiver.
Can I buy additional microphones if the one comes with it breaks if so which model? Also what is the battery usage on the microphones, assuming Durace
yes you may purchase a replacement microphone for this unit. We have a dedicated Customer Support who can help you out with your concern. Please call 718 535 1800 Press 2 then 1 from Monday to Friday from 9 AM to 5 PM EST.
Can this be use with a portable speaker with an “aux in” mini plug port?
Yes, it can be connected to it.
Where this product made
It is manufactured in China.
Can I connect additional wireless microphones? would they function in the same channel as the included mics?
you can connect VHF wireless microphone to this unit to avoid frequency interruption. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDKWM806B for more details.
Can I use for 220v voltage?
yes this unit can handle up to 240 volts. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDKWM806B for more details.
Can I use inputs with an electric guitar?
Kindly send us a message at support@pyleusa.com so we can help you out with your specific questions and concerns that are not listed in the product description or instruction manual.
Are microphones built battery saver? I tried another product, and microphones are sleep mode when I am not using the certain period of time.
the battery life will depend on how you use the unit. You have to turn the microphone OFF after use.
Can I send output direct to PC with different cable?
our sincere apologies but it only works with devices with a Microphone Input port. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDKWM806B.
Is the 1/4 inch output for TS or TRS cables?
it TS cable. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDKWM806B for more details.
