Pyle PDWMU105 Portable UHF Wireless Microphone System
Portable UHF Wireless Microphone System – Professional Battery Operated Handheld Dynamic Unidirectional Cordless Microphone Transmitter Set w/Adapter Receiver, for PA Karaoke DJ Party – Pyle PDWMU105
Unlike low-grade VHF units, these cordless singing microphones have UHF audio transmission for unmatched performance with high signal to noise ratio for clear, noisy, distortion-free, crisp vocals and great sound reproduction. This wireless handheld microphone system offers a wide audio response range with low distortion and a digital display with configurable mic frequency. Take advantage of cordless karaoke singing and mobility for a dynamic on-stage performance. A receiver with a 14″ (6. 3mm) jack plug-in audio adaptor is included with the Pyle wireless microphone system. a built-in antenna that increases wireless range.
It has direct connections to DJ mixers, audio processors, stereos, and amplifiers. The receiver includes a 3. 7V rechargeable battery, while the wireless professional microphone runs on two AA batteries. used in karaoke, in the classroom, and in professional settings. Ideal for studio and public performances. has an ON/OFF switch for convenient control and an integrated acoustic pop filter, which serves as a noise protection filter for microphones. Its longevity is ensured by its heavy-duty design, steel mesh grill, and aluminum alloy metal.
RECEIVER AND TRANSMITTER INTRODUCTION
- ON/OFF switch
- Antenna
- RF LED indicator
- DC 5V rechargeable power input
- ON/OFF switch
- Frequency Selection Bottom
- Frequency Display
- Battery Compartment
HOW TO USE?
- Turn ON/OFF switch to ON, the LED indicator is lit. Then insert the 1/4”(6.3mm) Input Jack into audio input socket.
- Install 2PCS AA batteries in battery compartment. Make sure the polar is correct.
- Turn ON the transmitter, the Frequency Display is bright. Then you could use this system.
- When the receiver is out of battery, please use the rechargeable cable to charge the built-in battery of the receiver.
NOTICE:
- If there is any noise, distortion, dead points when using this system, it may be caused by low battery, please replace with new battery.
- After stop using it, please turn the switch to “OFF”.
- If you don’t use this system for long time, please take out the batteries.
FREQUENCY MATCHING
If there are multiple sets of products in the same environment, crosstalk may occur (same frequency and ID). It can be completely solved after matching operation according to the following steps.
- Turn OFF the transmitter and receiver at the same time.
- Transmitter: Press and hold ON/OFF switch and Frequency Selection Button at the same time for about 4 seconds, then the Frequency Display will flash
- Receiver: Turn ON the power switch of the receiver, then the RF LED indicator flashes four times.
- Transmitter: Shortly press the Frequency Selectable Button to exit the matching operation.
FEATURES
- Pro Audio Microphone System
- Handheld Wireless Mic & Receiver Adapter
- UHF Narrow Band Audio Transmitter
- Portable Battery-Operated Design
- Mic Adapter with Built-in Rechargeable Battery
- Digital Display with Selectable Mic Frequency
- Integrated Antenna for Extended Wireless Range
- Simple Plug-and-Play Operation
- Includes Plug-in Audio Adapter Receiver
- Audio Receiver with 1/4” -inch (6.3mm) Jack
- Built-in Acoustic Pop Filter
- Integrated Low Noise Circuitry
- Ultra-Wide Frequency Response
- Noise-Eliminating SMT Technology
- Crisp Audio Clarity for Vocals & Singing
- LED Indicator Light
- Power ON/OFF Switch
- Rugged & Durable Mic Construction with Steel Mesh Grill
- Perfect for Professional Audio Stage & Studio Performances
- Directly Connects to Amplifiers, Stereos, Audio Processors, DJ Mixers
- Used for Home Karaoke, Classroom, Office & Business Applications
TECHNICAL SPECS
- Wireless Operation: UHF Band Transmitter
- Selectable Frequency Mic Design: 16 Channel
- Microphone Element/Type: Dynamic
- Pickup/Polar Pattern: Uni-Directional
- Wireless Operating Range: Up to 165’+ ft.
- Receiver Connector Type: 1/4” -inch (6.3mm)
- Audio Stability: 50PPM
- Frequency Response: 50Hz-18kHz
- Receiving Sensitivity: <95 dBm
- S/N Ratio: 96dB
- Distortion: <0.1%
- Modulation Mode: FM
- Output Power: 10mW
- Harmonic Radiation: <50 dB
- Receiver Working Current: <100 mA
- Mic Construction Material: Aluminum Metal Alloy
- Receiver Rechargeable Battery: 3.7V Li-ion, 450mAh – 1.665Wh – 9g
- Power Supply: USB, DC 5V
- Battery Operated Microphone, Requires (2) x ‘AA’ (Not Included)
- Handheld Mic Size (L x W x H): 10.0” x 2.0” x 2.0’’ -inches
- Mic Receiver Size (L x W x H): 3.74” x 1.2’’ x 1.2” -inches
WHAT’S IN THE BOX
- Wireless Handheld Microphone
- Mic Transmitter Receiver
- USB Charge Cable
- Audio Receiver Adaptor, 6.3mm-to-3.5mm
FAQs
Will this work on a Pathfinder system?
it will work on all devices with Mic In port. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWMU105.
would this mic work on a Bose s1 pro Speaker?
If your speaker has a mic input, you can plug this mic in.
I have a bluetooth speaker can I connect through the speakers built in bluetooth or do you still need to use the receiver that comes with the mic?
You need the receiver; this is not a Bluetooth microphone.
Will it work with pwma1216bm speaker?
If the speaker has a 1/4 inch mic input jack it will work.
Will I be able to plug the aux into my android phone?
It can only be plugged into an amplifier/receiver.
Is there any way I can purchase a new receiver? The charging port has been junk since I’ve bought this.
We can provide the part/s that are available in our warehouse. For other concerns and inquiries kindly call our Customer Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
What does it mean by UHF
UHF means Ultra-High Frequency. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDWMU105 for more details.
Will this work with an iron pathfinder 4? I’m not very tech savvy but I believe it has aux is there some sort of adapter for this if no mic outlet?
this unit works on all devices with 1/4″ mic input port. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDWMU105 for more details.
Will the receiver and/or the microphone function while connected to USB or is it non-functional when charging?
nonfunctional while charging.
Does this work with MacBook for zoom or Teams calls?
it is compatible to all devices with a 1/4″ port.
Is there a volume on the mic?
No, the volume depends on your mixer and/or amplifier.
Will the receiver work with a 3.5mm adapter?
the receiver is already 3.5. if you want to go to 1/4 it should work fine too.
Will this microphone work on a pwma1216bm speaker?
If the speaker has a 1/4 inch jack input for a mic it will work with it.
Is this microphone compatible with the win bridge wb001 portable voice amplifier?
it is compatible to all devices with a 1/4″ Mic Input port. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWMU105.
Do you have to hook this microphone to a speaker or an amp?
This device will output an electric signal that needs to be plugged into some device to amplify it, just like any other microphone. I tested it by plugging it into my computer microphone jack. It can also be plugged into an amplifier which may require and adapter depending on the size of the input jack. If the speaker has a built-in amplifier, that would likely work as well if it has an input jack.
