Pyle PDICBT552RD Pair Bluetooth Flush Mount
Introduction
Thank you for purchasing this PYLE Bluetooth Ceiling / Wall Speaker system. It is a state of the art product carefully designed and manufactured for your installation needs, and has been thoroughly tested to ensure consistent and reliable performance.
If you have any question about the installation or operation of your PYLE Bluetooth Ceiling / Wall Speaker System which are not answered by this manual, contact your dealer immediately.
Specifications
- Amount of Speakers: 2
- Speaker size: 5”
- MAX Output Power: 200 watt
- Impendence: 8 Ohm
- Sensitivity: 88 dB
- Frequency Response: 70-20 kHz
- Cut-Out Diameter: 6”
- Mounting Depth: 8”
Bluetooth Connection Diagram
- Bluetooth Version:0
- Bluetooth Network Name: Pyle
- Bluetooth Network Password: ‘0000’
- Bluetooth Wireless Range: 30’+Feet
- As shown in pictures, A is speaker, B is speaker, C is Bluetooth controller, and D is power adapter.
- As shown is Picture C, port (1)(2) connect to the negative pole of speaker in Picture A, port (3)(4) connect to the positive pole of speaker in Picture Port (5) connects to power adapter in Picture D’s D1port.
EXISTING CONSTRUCTION
IN-CEILING SPEAKERS
Cut the drywall
Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.
Connect the speaker wires to the speaker.
Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.
Replace the metal grille.
Complete.
Bluetooth Connection Diagram 4 CHANNEL
- Bluetooth Version:0
- Bluetooth Network Name: Pyle
- Bluetooth Network Password: ‘0000’
- Bluetooth Wireless Range: 30’+Feet
- As shown in pictures, A is speaker, B is speaker, C is Bluetooth controller, D is power adapter, E is speaker, and F is speaker.
- As shown is Picture C, port (1) (2) connect to the negative pole of speaker in Picture A, port (3)(4) connect to the positive pole of speaker in Picture B, port (6)(7) connect to the positive pole of the speaker in Picture E, port (8)(9) connect to the positive pole of speaker in Picture F, port (5) connects to power adapter in Picture D’s D1port.
- As shown in pictures, A is speaker, B is speaker, C is Bluetooth controller, D is power adapter is speaker, and F is speaker
- As shown is Picture C, port (1) (2) connect to the negative pole of speaker in Picture A, port (3) (4) connect to the positive pole of speaker in Picture B, port (6) (7) connect to the positive pole of speaker in Picture E, port (8) (9) connect to the positive pole of speaker in Picture F, port (5) connects to power adapter in Picture D’s D1port.
Frequently Asked Questions
Each gadget contains around one Bluetooth chip, but only with a laptop running iOS. not using a smartphone. There are powerful laptops available. Both speakers must be close enough to hear one another in order to connect two speakers together using a MacBook.
We appreciate you informing us about this. It utilises Bluetooth to operate.Given that both negative and good reviews have been received for the suggested wire
It wasn’t the wire that came with the speakers, but I’m not sure what kind of wire the installers used for mine.
Hello, you can install this item without a bracket. Simply drill a hole for the speaker and fasten it with a bolt to complete the project. Visit our website, pyleaudio.com, to get the whole list of the device’s specifications. To get more information, type PDICBT552RD after the model number in the search area. I’m grateful.
If your television offers a Bluetooth connection option, I think you’ll be okay. It establishes a unique Bluetooth connection. To link our iPhones to, we use four of them. Because of their excellent quality, I would most definitely purchase them again.
I’m not sure. I purchased this one. I have two. One each for the bathroom and bedroom of each daughter
We deeply regret the lack of installation videos for this product. If you have any additional questions or concerns, please call our customer service department at 718 535 1800. Press 2 first, then 1 from Monday through Friday, 9 AM to 5 PM EST. I appreciate it.
I’m not certain. I bought this one. I’ve got two. One for each daughter’s bedroom and bathroom
We very regret that this product does not have installation videos available. Please contact our customer service department at 718 535 1800 if you have any more questions or issues. From Monday through Friday, 9 AM to 5 PM EST, press 2 first, followed by 1. I’m grateful.
Even though they are listed as maritime type mines, I believe the mines I have in the kitchen are not waterproof.
I feel that the sound quality of these speakers is subpar. You couldn’t buy me to use them because they sound tinny.
Only two speakers can be supported by the poor Bluetooth receiver. The majority of modern phones can cast to two Bluetooth receivers at once, providing four speakers.
Although it is feasible, it is not advised due to the risk of harm to the device’s Bluetooth controller.
The volume should be managed by the TV to which the speakers are connected.
Yes, you can and it does need 12v DC power, which is provided by its converter, if you mean aboard a boat.
They don’t really rock a lot of base, but they should be fine for meeting-style stuff. It includes everything you need to get started, including the Bluetooth receiver.
It should, indeed. Six to ten inches of spray insulation were used when I installed mine in the porch ceiling and works well.
