Pyle PDICBT652RD Pair Bluetooth Flush Mount
Introduction
Thank you for purchasing this PYLE Bluetooth Ceiling / Wall Speaker system. It is a state of the art product carefully designed and manufactured for your installation needs, and has been thoroughly tested to ensure consistent and reliable performance.
If you have any question about the installation or operation of your PYLE Bluetooth Ceiling / Wall Speaker System which are not answered by this manual, contact your dealer immediately.
Specifications
- Amount of Speakers: 2
- Speaker size: 25”
- MAX Output Power: 250 watt
- Impendence: 8 Ohm
- Sensitivity: 89 dB
- Frequency Response: 50-20 kHz
- Cut-Out Diameter: 3”
- Mounting Depth: 0”
Bluetooth Connection Diagram
- Bluetooth Version:0
- Bluetooth Network Name: Pyle
- Bluetooth Network Password: ‘0000’
- Bluetooth Wireless Range: 30’+Feet
- As shown in pictures, A is speaker, B is speaker, C is Bluetooth controller, and D is power adapter.
- As shown is Picture C, port (1)(2) connect to the negative pole of speaker in Picture A, port (3)(4) connect to the positive pole of speaker in Picture Port (5) connects to power adapter in Picture D’s D1port.
EXISTING CONSTRUCTION
IN-CEILING SPEAKERS
Cut the drywall
Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.
Connect the speaker wires to the speaker.
Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.
Replace the metal grille.
Complete.
Bluetooth Connection Diagram 4 CHANNEL
- Bluetooth Version:0
- Bluetooth Network Name: Pyle
- Bluetooth Network Password: ‘0000’
- Bluetooth Wireless Range: 30’+Feet
- As shown in pictures, A is speaker, B is speaker, C is Bluetooth controller, D is power adapter, E is speaker, and F is speaker.
- As shown is Picture C, port (1) (2) connect to the negative pole of speaker in Picture A, port (3)(4) connect to the positive pole of speaker in Picture B, port (6)(7) connect to the positive pole of speaker in Picture E, port (8)(9) connect to the positive pole of speaker in Picture F, port (5) connects to power adapter in Picture D’s D1port.
- As shown in pictures, A is speaker, B is speaker, C is Bluetooth controller, D is power adapter is speaker, and F is speaker
- As shown is Picture C, port (1) (2) connect to the negative pole of speaker in Picture A, port (3) (4) connect to the positive pole of speaker in Picture B, port (6) (7) connect to the positive pole of speaker in Picture E, port (8) (9) connect to the positive pole of speaker in Picture F, port (5) connects to power adapter in Picture D’s D1port.
Frequently Asked Questions
Only with a laptop running iOS; each device has about one Bluetooth chip. Not with your smartphone. Powerful laptops are available. To link two speakers together using a MacBook, both speakers must be close enough to hear one another.
Thank you for letting us knows about this. It functions via Bluetooth.
I’m not sure what kind of wire the installers used for mine, but it wasn’t the wire that was included with the speakers.
Hello, you don’t need a bracket to install this unit. Simply make a hole for the speaker and screw a bolt through it to finish the job. See the whole list of specifications for the device on our website, pyleaudio.com. Enter PDICBT652RD after the model number in the search field to see more details. I appreciate it.
I believe you should be fine if your television has a Bluetooth connection option. It creates a distinctive Bluetooth connection. We utilize four of them to connect our iPhones to. They are quite high quality, and I would most definitely buy them again.
I’m not certain. I bought this one. I’ve got two. One for each daughter’s bedroom and bathroom
We very regret that this product does not have installation videos available. Please contact our customer service department at 718 535 1800 if you have any more questions or issues. From Monday through Friday, 9 AM to 5 PM EST, press 2 first, followed by 1. I’m grateful.
I’m not sure. I purchased this one. I have two. One each for the bathroom and bedroom of each daughter
We sincerely apologise that there are no installation videos available for this product. For any additional inquiries or problems, kindly call our customer support department at 718 535 1800. Press 2 and then 1 from Monday through Friday, 9 AM to 5 PM EST. I appreciate it.
The mines I have installed in the kitchen, even if they are designated as maritime type, are not waterproof, in my opinion.
These speakers have poor sound quality in my opinion. They sound tinny, so you couldn’t buy me to use them.
The subpar Bluetooth receiver can only support 2 speakers. Most current phones may simultaneously cast to two Bluetooth receivers, creating four speakers.
Although it is possible, it is not recommended because the Bluetooth controller of the device could be damaged.
The TV to which you attached the speakers should control the volume.
