PROMASTER ELECTRONIC APID02 Portable Infotainment Display
Product Specifications
- Full HD display (1024*600)
- Dual Channel Camera
- Touchscreen
- Bluetooth connectivity
- Wi-Fi connectivity
- FM radio
- SD card recording
- USB Interface Type Interface Power
Product Overview
The 7MIRROR uses two wide-angle cameras mounted inside and outside the vehicle to capture images of the surrounding area and transmit them in real time to an integrated device. This system helps drivers visualize obstacles and pedestrians around the vehicle, effectively reducing accidents such as scrapes, collisions, and collapses. It can record all driving images to avoid disputes.
Product Accessory List
Note: Some products may slightly differ from actual items. Please refer to the actual product.
Product Description
| Sports Event | Functional Introduction | Parameters |
|---|---|---|
| Systems | Simplified Chinese/Traditional Chinese/English/Russian/Spanish/French/German | |
| Operating Interface | Graphical menu operation | |
| Video Input | 2 HD video inputs | Default startup logging with no missing seconds |
| Video Format | 2K H.264 video, 2 video channels saved separately | |
| Video Display | Real-time display IPS screen | |
| Local Replay | Local playback, watch anytime | |
| Screen Saver | Screensaver can be set to: Off / 1 minute / 5 minutes | |
| Inverted Display | Automatic switching to rear view | |
| Stern Line Adjustment | Adjustment of commutation lines for various models | |
| Wireless Network | Support iOS Apple CarPlay and Android Auto system | |
| Bluetooth | Support Bluetooth music playback | |
| Tune | Supports FM for connection to car radio | |
| Video Storage | SD card CLASS10U1: up to 256GB | |
| Microphones | Support microphone recording, menu can be set to off | |
| Voice Control | Support voice control, can be set to close the menu | |
| Ancillary | Audio output port for audio playback through car stereo | |
| Power Component | Car charger supports 9V – 12V wide voltage with power protection circuits | Electricity consumption less than 10 watts |
| Operating Temperature | Passive cooling | |
| Video Time | Video recording duration can be set | |
| Channel Trigger Delay | Reverse signal delay can be set | |
| Camera Mirroring | The camera supports mirrored display and the menu can be set to |
Note: Some product functions may slightly differ from actual items. Please refer to the actual product.
SD Card Specifications
The quality of the SD card greatly impacts the stability of video recording. To record video safely, use SD cards from major brands such as SanDisk, Kingston, Toshiba, and Samsung. The speed certification must be at least Class10.
Wiring Instructions
Details are as follows:
| Harbours | Clarification |
|---|---|
| C – Interface | Monitor Power Interface |
| Cigarette Charger | Cigarette lighter direct power |
Note: This product comes standard with a cigarette charger. If you don’t use our original charger, you need to buy a compliant and high-quality cigarette lighter charger, otherwise it is easy to damage the machine or cause other injuries due to insufficient voltage and heat generation.
Camera Installation
Determine the drilling position, find the suitable mounting position in the license plate attachment, mark it with a pen, and then drill the appropriate size screw holes. Fix the camera to the rear of the car with screws. The reversing trigger wire (red thin wire) needs to be connected to the positive terminal of the reversing light, and finally connect to the monitor with the camera extension cable.
Interface Specification
CarPlay
Click the [AppleCarPlay] button to enter AppleCarPlay. Connect with your mobile phone by Bluetooth to enter the CarPlay interface. After powering on, the machine will automatically connect to the last connected mobile phone. (Disconnect by turning off the Wi-Fi button, AppleCarplay option is only supported for iPhone, turn off your phone’s Wi-Fi button to disconnect)
Android Auto
Turn on your phone’s Wi-Fi and Bluetooth first, then select the [AndroidAuto] option. Connect your phone’s Bluetooth to access the AndroidAuto interface.
(Disconnect by turning off the Wi-Fi button)
When you change mobile phones, the connection data of the previous mobilephone will be cleared.
Bluetooth Music
Firstly turn on your phone’s Wi-Fi and Bluetooth，Then select the [Bluetooth. Music] option。Tap the [BTManage] option on the interface to connect your mobile phone with Bluetooth connection and start playing music.
The buttons correspond to previous page, play /pause and next page respectively.
Click the Lyrics button to display the lyrics.
(Some mobile music player apps don’t support displaying lyrics）
Vehicle Records
As shown in the picture above, the music playback interface will be displayed in the main page, click in to play music.
FM
As shown in the picture, click the FM button to enter the FM function: it can send out the sound of the device, receive it withthe original radio, and play it through the original speakers to enjoy the original sound. Matching wires are needed to use it.
- Click the Open Device [Start Device] button.
- Select the frequency band to be transmitted, e.g. FM98.0MHZ.
- The car radio can also adjust the frequency band to FM98.0MHZ.
- The car radio can connect to the FM signal of the upper system.
After the FM is successfully connected, all sounds will be sent tothe original car speakers for playback.
Bluetooth
- Click on the Bluetooth button as shown in the figure[
]Turn on your Bluetooth。 - The page will display the device name，For example, F900-11205A, and then click the
- Modify button[
]Changing the Bluetooth name of a device。 - Select the device name with Bluetooth and the device name of the mobile phone will be displayed after successful connection. At the same time, you can play music and other features on your mobile phone click on a button[
]Return to previous page.
Set up
Fault resolution
| Issues | Prescription |
|---|---|
| Unbootable |
|
| No Touching |
|
| No Image from Rear View Camera |
|
| Machine Heating, Lagging Phenomenon | Avoid direct sunlight or exposure. Power supply should be below 149°F for normal operation. |
| Carplay Connectionless | Check if your phone’s Wi-Fi and Bluetooth functions are working properly. Delete all records and reconnect. |
| connectionless Android Auto |
|
| Bluetooth Music | Please set the screen playback mode to Bluetooth music, other modes do not support Bluetooth music. |
Reminder: please make sure that there is no obstacle between the mobilephone and the device, and the Wi-Fi/Bluetooth signal communication is smooth,otherwise the product function will not be able to use smoothly. Bluetooth/Wi-Fisignal communication is smooth, otherwise the product function will not work smoothly.
Product Parameter
| Name | Portable Infotainment Display |
|---|---|
| Controller | High Performance SOC |
| Wireless System | Wireless AppleCarplay, Wireless AndroidAuto |
| Screen | IPS with 1024*600 resolution |
| Storage Expansion | SD < 256G Class10 |
| Wireless Module | Wireless, BT, FM Modules |
| Cameras | Dual front and rear cameras |
| Built-in Speaker | 2 Watt Speaker |
| FM Activation | Adjustable frequency 87MHz-108MHz |
| Reversed Image | Automatic reversing video display |
| Operating Voltage | 9V-12V adaptive |
| Working Power | Less than 10W |
| Sizes | 255*72*39 mm |
| Weight | Approx. 350g including stand |
| Makings | ABS/PC |
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterferenc to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Frequently Asked Questions
What type of SD card should I use for video recording?
To ensure stable video recording, use SD cards from major brands such as SanDisk, Kingston, Toshiba, or Samsung with at least Class10 speed certification.
How do I switch to rear view mode?
The system is designed to automatically switch to rear view mode when needed based on the input signals. You can also adjust the settings for camera mirroring and reverse signal delay in the menu.
Documents / Resources
 |
PROMASTER ELECTRONIC APID02 Portable Infotainment Display [pdf] User Guide APID02, APID02 Portable Infotainment Display, Portable Infotainment Display, Infotainment Display, Display |