Accessory Shelf    6074

Product Information and Installation Instructions

Tools not included.

Polyvance 6074 Nitro Fuser Accessory Shelf 0

Polyvance’s 6074 Accessory Shelf can be attached to any flat-topped Polyvance nitroden welder to provide convenient storage of tools and accessories during plastic repair. The shelf easily folds out of the way when not in use to save shop space.

Benefits:
  • Safely holds tools like grinders, cutters, and sanders.
  • Installs easily.
  • Increases the utility of the welding cart set-up
  • Folds out of the way when not in use.
Features:
  • Powder-coated, 16 gauge steel for durability.
  • Bolted design for strength and simplicity.
  • Slotted edge design to hold extra air tools.
  • 10 lb weight limit
  • Open dimensions: 16.8 in x 9.4 in x .75 in 42.7 cm x 23.9 cm x 1.9 cm
  • Closed dimensions: 10.5″ x 9.4″ x .81″ 26.7 cm x 23.9 cm x 1.9 cm
Installation Instructions:

1: Align the sides of the drilled stationary shelf with the edges of the welder and mark the hole locations onto the welder top.

2: Lightly centerpunch the (4) hole locations onto the top.

3: Remove the (8) screws that secure the top to the welder.

4: Mark the top yellow wire with tape to identify it later and unplug the (3) wires going to the trigger switch.

5: With the lid removed, drill (4) 1/4″ holes where markded. DO NOT DRILL WITH THE LID ON THE WELDER!

6: Deburr the holes.

7: Securely fasten the shelf to the lid with (4) 1/4″ bolts and locknuts. Tighten firmly.

8: Install the hinged part of the shelf with the remaining 2 bolts and locknuts. Do not fully tighten or you will not be able to fold the shelf.

9: Reconnect the wires in the same order as removed .

10: Reinstall the lid, taking care not to overtighen the screws.

Polyvance 6074 Nitro Fuser Accessory Shelf 1
Polyvance 6074 Nitro Fuser Accessory Shelf 2
Polyvance 6074 Nitro Fuser Accessory Shelf 3
Polyvance 6074 Nitro Fuser Accessory Shelf 4
Polyvance 6074 Nitro Fuser Accessory Shelf 5

Polyvance logo

Customer Support:
Toll Free: 800-633-3047
Phone: 256-638-4103
www.polyvance.com

1128 Kirk Rd. Rainsville, AL 35986-6028 USA

6074 installationsheet.indd 09/16

Documents / Resources

Polyvance 6074 Nitro Fuser Accessory Shelf [pdf] Installation Guide
6074, 6074 Nitro Fuser Accessory Shelf, 6074, Nitro Fuser Accessory Shelf, Fuser Accessory Shelf, Accessory Shelf

References

Leave a comment

Your email address will not be published. Required fields are marked *