polk SR2 React Sub Wireless Subwoofer

polk SR2 React Sub Wireless Subwoofer

Thank You For Your Polk® Purchase!

If you have a question or comment, please feel free to contact us.

Technical Assistance

North America: 800-377-POLK (7655)
United Kingdom and Ireland: +44 2890279830
Netherlands: +31 402507800
Other countries: +1-410-358-3600

Email: polkcs@polkaudio.com
Polk FAQs: polk.custhelp.com

In all other countries, refer to polk-eu@mailmw.custhelp.com for support contact details.

Polk Audio is a DEI Holdings, Inc. company. Polk Audio and Polk are registered trademarks of Polk Audio, LLC. All other trademarks, product names, logos, and brands referenced herein are the property of their respective owners.

What’s In The Box

  • Subwoofer
    What’s In The Box
  • Power cable
    What’s In The Box
  • Product literature
    What’s In The Box

Position Your Subwoofer

  1. Unpack the subwoofer and power cable.
    Position Your Subwoofer
  2. Place the subwoofer along the same wall as the TV, no more than 30 ft (10m) from the sound bar.
  3. Connect the power cord to the back of the subwoofer.
  4. Connect the other end of the power cord into an AC power outlet.
    Position Your Subwoofer

Connect Your Subwoofer

Enter pairing mode on the sound bar

  1. Press and hold the CONNECT button on the back of the sound bar for about four seconds.
    Connect Your Subwoofer
    Connect the subwoofer
  2. Press and hold the CONNECT button on the back of the subwoofer for about four seconds.
  3. Release the button when the light on the back of the subwoofer is solid green.
    Connect Your Subwoofer
  4. Press and release the CONNECT button on the back of the sound bar to complete pairing.

I Do Not Hear Sound From My Subwoofer

  • Check that the sound bar is powered on and playing audio.
  • Turn up the bass using the provided Polk remote.
  • Check that the power cable is secure in the back of the subwoofer and wall outlet.
  • Check that a solid green light is visible on the back of the subwoofer.
  • Unplug power from the subwoofer for 30 seconds and then plug back in.
  • If the light on the back of the subwoofer is flashing green, you will need to reconnect the subwoofer to the sound bar using the instructions in “Connect Your Subwoofer”.

Updating Your Subwoofer

The subwoofer is automatically updated whenever your sound bar is connected to the Internet and receives an update. Refer to your sound bar’s Quick Start Guide and make sure your sound bar is properly connected to your home network.
For more troubleshooting and information, please visit polkaudio.com/support.

Customer Support

5541 Fermi Court Carlsbad, CA 92008 U.S.A.
www.polkaudio.com
800-377-7655 (POLK)

Logo

Documents / Resources

polk SR2 React Sub Wireless Subwoofer [pdf] User Guide
SR2 React Sub Wireless Subwoofer, SR2, React Sub Wireless Subwoofer, Sub Wireless Subwoofer, Wireless Subwoofer, Subwoofer

References

Leave a comment

Your email address will not be published. Required fields are marked *