PHOENIX CONTACT GMVSTBR 2.5-3-ST Printed Circuit Board Connector Instruction Manual
Printed Circuit Board Connector
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user’s documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download)
PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, Number of rows: 1, Number of positions per row: 3, number of connections: 3, product range: GMVSTBR 2,5/..-ST, pitch: 7.5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 90 °, Locking clip: – Locking clip, plug-in system: CLASSIC COMBICON, Locking: without, mounting: without, type of packaging: packed in cardboard
- Well-known connection principle allows worldwide use
- Low temperature rise, thanks to maximum contact force
- Larger pitch for increased voltage requirements
- Allows connection of two conductors
Key Commercial Data
| Packing unit | 1 pc |
| Minimum order quantity | 50 pc |
| GTIN |  |
| GTIN | 4017918027957 |
| Weight per Piece (excluding packing) | 7.410 g |
| Custom tariff number | 85366990 |
| Country of origin | Germany |
Technical data
Item properties
| Brief article description | PCB connector |
| Connector system | CLASSIC COMBICON |
| Type of contact | Female connector |
Technical data
Item properties
| Range of articles | GMVSTBR 2,5/..-ST |
| Pitch | 7.5 mm |
| Number of positions | 3 |
| Drive form screw head | Slotted (L) |
| Screw thread | M3 |
| Locking | without |
| Number of rows | 1 |
| Number of connections | 3 |
| Number of potentials | 3 |
Electrical parameters
| Nominal current | 12 A |
| Nom. voltage | 630 V |
| Rated voltage (III/3) | 500 V |
| Rated voltage (III/2) | 630 V |
| Rated voltage (II/2) | 1000 V |
| Rated surge voltage (III/3) | 6 kV |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (II/2) | 6 kV |
Connection capacity
| Connection method | Screw connection with tension sleeve |
| pluggable | Yes |
| Conductor cross section solid | 0.2 mm²… 2.5 mm² |
| Conductor cross section flexible | 0.2 mm²… 2.5 mm² |
| Conductor cross section AWG / kcmil | 24 … 12 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm²… 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm²… 2.5 mm² |
| 2 conductors with same cross section, solid | 0.2 mm² … 1 mm² |
| 2 conductors with same cross section, flexible | 0.2 mm²… 1.5 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² … 1 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² … 1 mm² |
| Cylindrical gauge a x b / diameter | 2.8 mm x 2.4 mm / 2.5 mm |
| Stripping length | 7 mm |
| Torque | 0.5 Nm…. 0.6 Nm |
Flange specifications
| Type of locking | without |
Material data – contact
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | hot-dip tin-plated |
| Metal surface terminal point (top layer) | Tin (4 – 8 µm Sn) |
| Metal surface contact area (top layer) | Tin (4 – 8 µm Sn) |
Material data – housing
| Housing color | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Dimensions for the product
| Caption | Download Center |
| Length [ l ] | 12.6 mm |
| Width [ w ] | 20.5 mm |
| Height [ h ] | 26 mm |
| Pitch | 7.5 mm |
| Height (without solder pin) | 26 mm |
Packaging information
| Type of packaging | packed in cardboard |
| Pieces per package | 50 |
| Denomination packing units | Pcs. |
General product information
| Type of note | Notes on operation |
| Note | In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. |
Ambient conditions
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
| Relative humidity (storage/transport) | 30 % … 70 % |
| Ambient temperature (assembly) | -5 °C … 100 °C |
| Ambient temperature (operation) | -40 °C … 100 °C (dependent on the derating curve) |
Termination and connection method
| Test for conductor damage and slackening | IEC 60999-1:1999-11 |
| Test passed |
Pull-out test
| Pull-out test | IEC 60999-1:1999-11 |
| Conductor cross section / conductor type / tensile force | 0.2 mm² / solid / > 10 N |
| 0.2 mm² / flexible / > 10 N | |
| 2.5 mm² / solid / > 50 N | |
| 2.5 mm² / flexible / > 50 N |
Mechanical tests according to standard
| Test specification | IEC 61984 |
| Visual inspection | IEC 60512-1-1:2002-02 |
| Dimension check | IEC 60512-1-2:2002-02 |
| Resistance of inscriptions | IEC 60068-2-70:1995-12 |
| Insertion and withdrawal force | IEC 60512-13-2:2006-02 |
| No. of cycles | 25 |
| Insertion strength per pos. approx. | 8 N |
| Withdraw strength per pos. approx. | 6 N |
| Polarization and coding | IEC 60512-13-5:2006-02 |
| Contact holder in insert | IEC 60512-15-1:2008-05 |
| Test force per pos. | 35 N |
Air clearances and creepage distances
| Clearances and creepage distances | IEC 60664-1:2007-04 |
| Specification | IEC 60664-1:2007-04 |
| Minimum clearance – inhomogeneous field (III/3) | 5.5 mm |
| Minimum clearance – inhomogeneous field (III/2) | 5.5 mm |
| Minimum clearance – inhomogeneous field (II/2) | 5.5 mm |
| Minimum creepage distance value (III/3) | 6.3 mm |
| Minimum creepage distance value (III/2) | 5.5 mm |
| Minimum creepage distance value (II/2) | 5.5 mm |
| Note on connection cross section | With connected conductor 4 mm² (solid). |
Current carrying capacity / derating curves
| Caption | Type: GMVSTBR 2,5/…-ST with GMSTBVA 2,5/…-G |
Mechanical tests (A)
| Test specification | IEC 61984 |
| Insertion strength per pos. approx. | 8 N |
| Withdraw strength per pos. approx. | 6 N |
| Polarization when inserted requirement >20 N | Test passed |
| Contact holder in insert requirements >20 N | Test passed |
Durability tests (B)
| Specification | IEC 60512-9-1:2010-03 |
| Contact resistance R1 | 3.7 mΩ |
| Insertion/withdrawal cycles | 25 |
| Contact resistance R2 | 3.8 mΩ |
| Impulse withstand voltage at sea level | 7.3 kV |
Thermal tests (C)
| Specification | IEC 60512-5-1:2002-02 |
| Number of positions | 12 |
| Upper limiting temperature requirements <100 °C | Test passed |
Climatic tests (D)
| Specification | ISO 6988:1985-02 |
| Cold stress | -40 °C/2 h |
| Thermal stress | 100 °C/168 h |
| Corrosive stress | 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle |
| Impulse withstand voltage at sea level | 7.3 kV |
| Power-frequency withstand voltage | 3.31 kV |
Environmental and durability tests (E)
| Specification | IEC 61984:2008-10 |
| Result, degree of protection, IP code | Finger safety with IP20 test finger |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
Diagram
Type: GMVSTBR 2,5/…-ST with GMSTBVA 2,5/…-G
Diagram
Type: GMVSTB(R/W) 2,5/…-ST with GMSTB 2,5/…-G
Diagram
Type: GMVSTB(R/W) 2,5/…-ST with GMSTBV 2,5/…-G
Diagram
Type: GMVSTB(R/W) 2,5/…-ST with GMSTBA 2,5/…-G
Classifications
eCl@ss
| eCl@ss 10.0.1 | 27440309 |
| eCl@ss 11.0 | 27460202 |
| eCl@ss 4.0 | 27260700 |
| eCl@ss 4.1 | 27260700 |
| eCl@ss 5.0 | 27260700 |
| eCl@ss 5.1 | 27260700 |
| eCl@ss 6.0 | 27260700 |
| eCl@ss 7.0 | 27440309 |
| eCl@ss 9.0 | 27440309 |
ETIM
| ETIM 3.0 | EC001121 |
| ETIM 4.0 | EC002638 |
| ETIM 6.0 | EC002638 |
| ETIM 7.0 | EC002638 |
UNSPSC
| UNSPSC 6.01 | 30211810 |
| UNSPSC 7.0901 | 39121409 |
| UNSPSC 11 | 39121409 |
| UNSPSC 12.01 | 39121409 |
| UNSPSC 13.2 | 39121409 |
| UNSPSC 18.0 | 39121409 |
| UNSPSC 19.0 | 39121409 |
| UNSPSC 20.0 | 39121409 |
| UNSPSC 21.0 | 39121409 |
Approvals
VDE  |
http://www2.vde.com/de/Institut/Online-Service/ 40050646 |
| Nominal voltage UN | 400 V |
| Nominal current IN | 12 A |
| mm²/AWG/kcmil | 0.2-2.5 |
CSA  |
http://www.csagroup.org/services-industries/product-listing/ LR13631-2585950 | |
| B | D | |
| Nominal voltage UN | 300 V | 300 V |
| Nominal current IN | 10 A | 10 A |
| mm²/AWG/kcmil | 28-12 | 28-12 |
IECEE CB Scheme  http://www.iecee.org/ DE1-60988-B1B2 |
|
| Nominal voltage UN | 400 V |
| Nominal current IN | 12 A |
| mm²/AWG/kcmil | 0.2-2.5 |
EAC 
B.01687
cULus Recognized http://database.ul.com/cgibin/XYV/template/LISEXT/1FRAME/index.htm E60425-19931013 |
||
| B | D | |
| Nominal voltage UN | 300 V | 300 V |
| Nominal current IN | 15 A | 10 A |
| mm²/AWG/kcmil | 30-12 | 30-12 |
AccessoriesCoding element
Coding profile – CP-MSTB – 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
Insertion bridge
Insertion bridge – EB 2-CC 7,5 – 1948048
Insertion bridge, pitch: 7.5 mm, color: gray
Labeled terminal marker
Marker card – SK 7,5/3,8:FORTL.ZAHLEN – 0804455
Marker card, Card, white, labeled, horizontal: consecutive numbers 1 … 10, 11 … 20, etc. up to 91 … 100, mounting type: adhesive, for terminal block width: 7.5 mm, lettering field size: 7.5 x 3.8 mm
Screwdriver tools
Screwdriver – SZS 0,6X3,5 – 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Additional product
Accessories
PCB header – GMSTB 2,5/ 3-G – 1766026
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, number of potentials: 3, Number of rows: 1, Number of positions per row: 3, number of connections: 3, product range: GMSTB 2,5/..-G, pitch: 7.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard
PCB header – GMSTBA 2,5/ 3-G – 1766356
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, number of potentials: 3, Number of rows: 1, Number of positions per row: 3, number of connections: 3, product range: GMSTBA 2,5/..-G, pitch: 7.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard
PCB header – GMSTBV 2,5/ 3-G – 1766466
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, number of potentials: 3, Number of rows: 1, Number of positions per row: 3, number of connections: 3, product range: GMSTBV 2,5/..-G, pitch: 7.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in card board
PCB header – GMSTBVA 2,5/ 3-G – 1766673
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, number of potentials: 3, Number of rows: 1, Number of positions per row: 3, number of connections: 3, product range: GMSTBVA 2,5/..-G, pitch: 7.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard
Phoenix Contact 2021 © – all rights reserved
http://www.phoenixcontact.com
Documents / Resources
 |
PHOENIX CONTACT GMVSTBR 2.5-3-ST Printed Circuit Board Connector [pdf] Instruction Manual GMVSTBR 2.5-3-ST Printed Circuit Board Connector, GMVSTBR 2.5-3-ST, Printed Circuit Board Connector, Circuit Board Connector, Board Connector, Connector |
