nVent CADDY CRLS37EG 8 Inch Channel Nut With Push To Install
CATALOG NUMBER
CRLS37EG
FEATURES
Provides fast universal attachment of threaded rod and hardware to standard strut profiles
Can be used to prefabricate assemblies which can be quickly pushed onto previously installed threaded rods
Works with slightly damaged threads and minor burrs on the threaded rod
PRODUCT ATTRIBUTES
- Material: Cast Iron
- Finish: Electrogalvanized
- Rod Size (RS): 3/8″
- A: 0.91″
- B: 1.4″
- C: 0.77″
- D: 0.53″
- Static Load (F): 750lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CUSTOMER SUPPORT
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
TRACER
nVent.com
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Documents / Resources
 |
nVent CADDY CRLS37EG 8 Inch Channel Nut With Push To Install [pdf] Owner's Manual CRLS37EG 8 Inch Channel Nut With Push To Install, CRLS37EG, 8 Inch Channel Nut With Push To Install, Nut With Push To Install, Push To Install |
