Newnex FireNEX-UDC Active USB-C to USB C Adapter

CONNECTION

1. Connect the Newnex special USB-C cable to device side of FireNEX-UDC.
   • If not using Newnex special USB-C cable, the USB-C connection will not support flip plug-in.
2. Connect a standard USB-C cable to the host side of FireNEX-UDC.
3. Connect the rest of USB connectors of the cables to host PC and USB devices.
4. Mount the bracket to the panel you intend to mount the FireNEX-UDC, the bracket is at Host side by default. You may switch it to the device side with a hex screwdriver.
5. You can also remove the bracket if you don’t need any mounting, keep the bracket stored in case you need it in the future.

FireNEX-UDC User Guide Rev 1.1

Specifications

• Product Name: FireNEX-UDC
• Connector Type: USB-C
• Compatibility: Host PC and USB devices
• Bracket: Mountable, reversible
• Version: Rev 1.1

FAQ

Q: Can I use any USB-C cable with FireNEX-UDC?
A: It is recommended to use the Newnex special USB-C cable for full compatibility and support for flip plug-in.

Documents / Resources

Newnex FireNEX-UDC Active USB-C to USB C Adapter [pdf] User Guide FireNEX-UDC Active USB-C to USB C Adapter, FireNEX-UDC, Active USB-C to USB C Adapter, USB-C to USB C Adapter, USB C Adapter, Adapter

References

• User Manual