User Guide for Newnex models including: FireNEX-UDC Active USB-C to USB C Adapter, FireNEX-UDC, Active USB-C to USB C Adapter, USB-C to USB C Adapter, USB C Adapter, Adapter

alan li

FireNEX-UDC User Guide

2 days ago — You may switch it to the device side with a hex screwdriver. 5. You can also remove the bracket if you don't need any mounting, keep the bracket stored in ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 577.27KB

Document Document

FireNEX-UDC User Guide
1. Connect the Newnex special USB-C cable to device side of FireNEX-UDC. *If not using Newnex special USB-C cable, the USB-C connection will not support flip plug-in.
2. Connect a standard USB-C cable to the host side of FireNEX-UDC.
3. Connect the rest of USB connectors of the cables to host PC and USB devices. 4. Mount the bracket to the panel you intend to mount the FireNEX-UDC, the bracket is at Host side by default.
You may switch it to the device side with a hex screwdriver.
5. You can also remove the bracket if you don't need any mounting, keep the bracket stored in case you need it in the future.
FireNEX-UDC User Guide Rev 1.1