NECTA ASTRO 4 Vending Machine
The IVP ASTRO 4 upgrade KIT was created to modernize the classic, familiar appearance of the NECTA ASTRO coffee machines and meet today’s expectations. The KIT was designed in such a way that it does not affect the basic function and operation of the machine in any way! It simply modernizes the outdated LCD screen for a nicer look.
Installation Steps
- Remove previous front LCD plastic panel from vending machine. (Remove 6 screws).
- Place previous and new front panel next to each other and remove all necessary parts from old front panel.
- Place back all plastic push buttons and springs to new front panel.
After fix sugar foil membrane buttons metal holder to its place.
- Screw back money back button hinge mechanic and coin slide tube.
- The new front panel is ready to place it to vending machine with 6 screws.
Connect sugar buttons plugs and connect LCDs data wires to new module.
Features
- Commercial grade
- Material: 3D printed PET-G case
- 4.0-inch, 480*480 pixels resolution,
- 16.7M colors, IPS-TFT-LCD, wide viewing angle.
- Backlight Mode LED
- Backlight Service Life >20000 hours
- Brightness 300nit
- Operating Temperature -20℃~70℃ (5V @ 60% RH)
- Storage Temperature -30℃~70℃
- Humidity 10%~90%RH, typical value of 60% RH
Documents / Resources
 |
NECTA ASTRO 4 Vending Machine [pdf] User Manual ASTRO 4 Vending Machine, ASTRO 4, Vending Machine, Machine |