MOes WM-104B-M Mini Smart Switch Module
Product Usage Instructions
- For the switch module: Press the reset button on the module for a long time until the beep sounds continuously and quickly for pairing and reset mode.
- For the rocker light switch: press the switch button 20 times (ON/OFF cycle for 10 times) until the beep sounds continuously and rapidly for pairing and reset mode.
- Add another smart switch to the same MOES App.
- If your switch requires a neutral wire, only L and N are required for wiring. If it doesn’t require a neutral wire, follow the wiring instructions.
- You can control lights simultaneously with multiple switches in the MOES App.
- Launch the Google Home App and ensure the Google Home speaker is installed.
- Open the Google Home app, click on the plus sign, then click on Set up device.
- Search for MOES, enable MOES smart skills, log in to your account, and wait for devices to be discovered.
- Your MOES application is now paired with Google Home, and you can control smart devices.
Please scan the QR code to view the German manual, get the installation video and function introduction
Introduction
- Global international operation Whenever & Wherever You are an all-in-one Mobile App
- In house local operation
Step 1
- Turn off the circuit breaker and use the electrical tester to test the power.
- Ensure the circuit breaker is off before wiring.
Attention
Please disconnect the power supply before installing or removing the device to avoid irreversible damage to the device from the electric current or some unpredictable problems such as lamp flashing.
Step 2
- Remove the old switch
Step 3
- Remove the switch and pull it away from the wall.
- Identify Line/Load Wire(Note: The color of your wire may be different from the color shown in the manual.)
Verify power is off
- We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
- You may need to turn off more than one circuit breaker.
Warnings
- Installation must be carried out by a qualified electrician under local regulations.
- Keep the device out of the reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
1Gang Smart Switch Module
TECHNICAL SPECIFICATIONS
- Model: WM-104-M
- Product Type: Smart Switch Module
- Voltage: 90-250V AC 50/60Hz
- Current: 10A/Gang;Total 10A
- Wireless Protocol: Wi-Fi、BLE
- Operation Temp: -10ºC ~ 65ºC
- Case Temp: Tc: +80ºC (Max.)
- Operation Range: ≤70 m
- Dims (WxDxH): 40x40x18 mm
- IP Rating: IP20
WIRING DIAGRAM
1Gang Smart Switch Module
- With one 1 Gang switch
- With two 2/3 Way switches
- With Wall Socket
Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Connect the power supply and follow switch module configuration instructions.
Notes: Put your smartphone close to the switch module when you’re configuring, and make sure you have min. 50% Wi-Fi signal.
FAQ
Q1: What should I do if I can’t configure the switch module?
a. Please check whether the device is powered on. b. Make sure your mobile and switch module are under the same 2.4 GHz WiFi network. c. Whether it’s in good internet conditions. d. Make sure the password entered in the App is correct. e. Make sure the wiring is correct.
Q2: What device can be connected to this WiFi switch module?
Most of your household electrical appliances can be such as lamps laundry machines coffee makers etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the switch module with your traditional switch and once WiFi is active again the device connected to the module will connect automatically to your WiFi network.
Q4: What should I do if I change the WiFi network or change the password?
You have to re-connect our WiFi switch module to the new WiFi network according to the App User Manual.
Download the MOES APP
Download the MOES App on the App Store or scan the QR code
MOES App is upgraded as much more compatibility than the Tuya Smart/Smart Life App, functional well for scenes controlled by Siri, widgets, and scene recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but the MOES App is highly recommended)
Registration or Log-in
Method One
Scan the QR code to configure the network guide.
Method two
Pair and clear up the WiFi code with Bluetooth and WiFi connected meantime.
For switch module:
- Press the reset button on the module for a long time until the beep sounds continuously and quickly for pairing and reset mode. l>
- press the switch button for20 times(ON/OFF cycle 10 times) until the beep sounds continuously and rapidly as Di-Di-Di… for pairing and reset mode.
- press the switch button 10 times until the beep sounds continuously and rapidly as Di-Di-Di… for pairing and reset mode.
For the rocker light switch:
For reset switch:
How to achieve multicontrol association (only for N+L wire)
Note: Please confirm you have successfully finished the link method above for adding this switch to your MOES App before the association.
Note: If your switch requires a neutral wire, then there is no need to wire the newly added switch to the light, only L and N are required for wiring. Then you can control 1 light with multiple switches in the MOES App.
If your switch doesn’t require a neutral wire, you need to follow the wiring instructions to connect the L and light. At this point, you can control the lights simultaneously with multiple switches.
in the upper right corner and choose “Multi-Control Association, and then click “+” in the right corner.
Note: Please confirm the associated switch is enabled.
Smart Device Linked Voice Speaker
Complete product networking configuration in the App
- Complete the device’s networking configuration according to the prompts in the App. Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as “bed light”. l>
- Launch the MOES App, sign into your account, and make sure Smart Device is on the device list.
- Minimize MOES App, then launch the Alexa App sign in to your Alexa account, and make sure you have at least one Alexa smart speaker-controlled device installed like Echo Dot, etc.
- Click on the search button in the upper right corner, enter “ MOES ” in the search box, and then search.
- Enable MOES Smart Skill then sign in to your Moes account to complete your account setup.
- Launch the Google Home App and make sure the Google Home speaker is installed. If not, please follow Google Home speaker installation instructions to complete the installation.
- Open the Google Home app and click on the plus sign in the top left corner to enter the “add and manage” page, then click on “Set up device”.
- Enter “MOES” in the search box and then search for it. Enable MOES smart skills, and then log in to your Moes account to complete the account setup. l>
- Products with damaged appearance, missing LOGO or beyond the service term
- The circuit is burned or the data cable or power interface is damaged
- Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.) l>
- All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste.
- To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities.
- Thank you for your support and purchase at We Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
- If you have any other needs, please do not hesitate to contact us first, and we will try to meet your demand.
How to connect Smart Device to Amazon Alexa
the button to show the APP Menu. Then select
in the menu.
Once the device is successfully discovered, your MOES application is now paired with Alexa. Clicking “
” will display all available devices in your APP, and now you can control smart devices through Alexa.
How to connect Smart Device to Google Home
After successfully logging into your account, you need to wait 20 seconds to search for devices. Once the device is successfully discovered, it means that your MOES application has been paired with Google Home, and all available smart devices are displayed on the homepage upon returning. Now you can use Google Home to control your smart devices.
SERVICE
Thank you for your trust and support of our products, we will provide you with a two-year worry-free after-sales service (freight is not included), please do not alter this warranty service card, to safeguard your legitimate rights and interests. If you need service or have any questions, please consult the distributor or contact us.
Product quality problems occur within 24 months from the date of receipt, please prepare the product and the packaging, applying for after-sales maintenance in the site or store where you purchase; If the product is damaged due to personal reasons, a certain amount of maintenance fee shall be charged for repair.
We have the right to refuse to provide warranty service if:
RECYCLING INFORMATION
WARRANTY CARD
Product Information
Maintenance Records
FOLOW US
@moessmart
@moes_smart
MOES.Official
www.moes.net
@moes_smart
@moes_smart
CONTACT
EVATOST CONSULTING LTD
AMZLAB GmbH
Manufacturer
Documents / Resources
 |
MOes WM-104B-M Mini Smart Switch Module [pdf] Instruction Manual WM-104-M, WM-104B-M, WM-104B-M Mini Smart Switch Module, WM-104B-M, Mini Smart Switch Module, Switch Module |