OUTSIDE POINT DIGITAL
CALIPER MICROTECH
USER MANUAL
MODIFICATIONS
| Item No | Range | Resolu- tion |
Jaws | Accu- racy |
Protection | ||
| Depth | D point |
||||||
| mm | inch | mm | mm | mm | μm | ||
| 1.41E+08 | 0-300 | 0-12” | 0.005 | 90 | 1 | 40 | IP54 |
functions
IP54 electronIcs
Hand fInIsHed surfaces
cr1632 3v battery
mm/IncH
PosItIon memorIzed
auto wake uP & swItcH off
OPERATION INSTRUCTIONS
3.1 Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
3.2 If necessary, open the battery cover; insert the battery (type CR1632) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.
It will be indication on display «——-» after battery chnging. Press ORIGIN button for 5 sec to start reading system.
3.3 During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object.
3.4 After finishing work wipe the measuring surfaces of the caliper with a cloth soaked in gasoline and apply anticorrosion oil.
WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
Scratches on the measuring surfaces;
Measuring the size of object in the process of machining;
Shocks or dropping, avoid bending of rod or other surfaces.
INDUSTRY 4.0 INSTRUMENTS
MICROTECH
innovative measuring instruments
61001, Kharkiv, Ukraine, str. Rustaveli, 39
tel.: +38 (057) 739-03-50
www.microtech.ua
tool@microtech.ua
Documents / Resources
 |
MICROTECH IP54 Outside Point Digital Caliper [pdf] User Manual IP54 Outside Point Digital Caliper, IP54, Outside Point Digital Caliper, Point Digital Caliper, Digital Caliper, Caliper |
