MICROTECH 141730155 Offset Digital Caliper User Manual
Offset Digital Caliper

MODIFICATIONS

Item No Range Resolution Accuracy Anvil D Waterproof f Display
mm mm mm mm Digit height 9mm
141730155 141730305 0.4-6” ±30 10 IP54
141731205 10-210 0.4-8” ±40 10 IP54
141730305c 10-310 0.4-12” ±60 10 IP54

BUTTON FUNCTIONS

Button Function

functions

IP54 electronics
Hand finished surfaces
cr1632 3v battery

mm/inch
Position memorized
Auto wake up & switch off

OPERATION INSTRUCTIONS 

  1. Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
  2. If necessary, open the battery cover; insert the battery (type CR1632) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery. It will be indication on display «——-» after battery chnging. Press ORIGIN button for 5 sec to start reading system.
  3. During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object.
  4. After finishing work wipe the measuring surfaces of the caliper with a cloth soaked in gasoline and apply anticorrosion oil.

Product Instruction

Warning Icon WARNING!

IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED: Scratches on the measuring surfaces; Measuring the size of object in the process of machining; Shocks or dropping, avoid bending of rod or other surfaces.

MICROTECH  Logo

Documents / Resources

MICROTECH 141730155 Offset Digital Caliper [pdf] User Manual
141730155 Offset Digital Caliper, 141730155, Offset Digital Caliper, Digital Caliper, Caliper

References

Leave a comment

Your email address will not be published. Required fields are marked *