MATT BLATT MBLIBTDATAA Dalen Table Lamp

SAFETY & WARNINGS

Ensure power is completely switched off before installing. Assemble as per the instructions below, and only connect to power when complete.

Notes:

1. Read this user guide carefully before installing the lamp.
2. To protect the lamp and prevent damage or scratches, ensure a soft blanket is laid down. We recommend wearing gloves when assembling the lamp.
3. If the power cord is damaged, cease use immediately. Contact help.kogan.com for support.

SPECIFICATIONS

• Power Supply 220V-240V ~50Hz
• Base E27 (Edison screw, 27mm)
• Wattage Max. 40W

COMPONENTS

ASSEMBLY

Note:
The bulb is not included.

NEED MORE INFORMATION?

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.mattblatt.com.au.

Documents / Resources

MATT BLATT MBLIBTDATAA Dalen Table Lamp [pdf] User Guide MBLIBTDATAA, Dalen Table Lamp, MBLIBTDATAA Dalen Table Lamp

References

• User Manual