Matrix_M2PRO Hand Drip LED Four Display Flow Rate Coffee Scale
Product Accessories
- a. Electronic Scale x 1
- b. Silicone Pad x 1
- c. Type-CChargingCable Xl
- d. User Manual x 1
- e. Diatomaceous Earth Pad x 1
- f. Charging Port Dust Cover
- g. Physical Power Button
Layout Description
If the battery symbol blinks during use, it indicates low voltage. Please charge the device promptly
Automatic power-off after 5 minutes of inactivity (factory setting)
**Sleep Time Setting – Six options : 3 / 5 / 10 / 30 / 60 minutes , All Off ( No Sleep Mode)
Mode Introduction
- M DO-Basic Function & Pour-Over Row Rate Practice Function
- After powering on, if the Mode Display Area does not show any indicators, it is in the MOO.
- Short Press
start and stop the timer , and Long Press to reset the timer. - Short Press
to tare the weight. 
When the flow rate bar function is enabled you can simply pour water to observe the flow rate value and the three-color-segmented bar, allowing you to practice controlling water flow stability.
Flow Rate Bar Display and Flow Rate Value
While the setting of Flow Rate Bar(SPEED) is activated, during the brewing process, once the device detects the water pouring, the flow rate bar will automatically light up according to the pouring speed .The lighting length on the flow rate bar differs between MD0/1/2/4 and MD3(Espresso Mode) as follows:
MDI-Coffee Brew Ratio Mode
Truly intelligent mode on M2 Pro allows you to know the volume of water poured and how much coffee you brewed by a single scale through following steps: 
After finishing of water pouring, you can lift up the” Dripper” only in order to see the volume of coffee liquid extracted which is shown at the upper right area as well as the Coffee Brew Ratio at the upper left area.
** Remove the carafe to lock in all data, completing the brewing process.
MD2-Pulse Pouring Mode with display of Coffee-to-Water Ratio
( Applicable for various Pulse Pouring methods)
This mode allows you to manually zero the scale and use the timer to easily perform Pulse Pouring methods, such as single-stage, three-stage, or 4:6 method.
During each pour, the increased water weight will be displayed at the upper right area, and automatically tare to zero after 2 second stabilization. The bottom right area shows the weight accumulation for all increased weight; this function will help you control the water volume and time for each pouring. By recording the weight of coffee ground, it also instantly shows the coffee-to-water ratio.
- Short press to record the current coffee ground weight and enter automatic timer mode. After the timer starts,
- short press again to pause or resume timing.
- Short Press to tare the weight.
MD3 – Espresso Mode
*This mode is specifically designed for use with espresso machines. It helps to prevent errors during espresso extraction by ensuring stable measurements and automatic timing. After the timer starts, during the first 15 seconds, the timer will not automatically stop to avoid erroneous locking when adjusting the cup position as coffee begins to drip. To trigger automatic stop and weight lock, the detected weight must exceed 15g, preventing incorrect operations.
Place the coffee scale onto the coffee machine, and oput the ESPRESSO “”cup on, it gets auto – zero once it senses the weight is stable. The
symbol will start flashing, indicating that the device is ready for coffee extraction.
The timer automatically starts when the scale senses a change in weight, and stops with no changes in weight.- During this phase, both the flow rate bar and flow rate values will activate. Within the first 15 seconds, you can adjust the coffee cup to align with th coffee drip without affecting the measurement. Once coffee extraction stops, the timer will stop and all data remain locked.
- After removing the cup or container, the scale will automatically start a countdown for reset after 10 seconds, allowing for continuous use.
MD4-Coffee-to-Water Ratio Mode (Chemex)
This mode is specifically designed for integrated brewing devices that cannot be separated, such as Chemex, pour-over stands, Aero Press, French press, and cold brew pots. By following the step-by-step instructions, the scale automatically calculates the coffee -to – water ratio, eliminating the need for manual calculations. During the brewing process, the scale will automatically start timing and weighing as soon as water is poured. Once the brewing is finished, remove all equipment and all data will remain locked and displayed. 
Product Specifications
- Name: Matrix M2 PRO Al MASTER SMART COFFEE SCALE I Model: M2 Pro (MXSM2PBK00) Origin: China I Voltage: 5V – l-2A I Type-C Charging ( 1500mAh Lithium Battery; Do not use Quick Charger!)
- Operating Modes: Basic I Coffee Brew Ratio I Pulse Pouring I Espresso I Coffee-to-Water Ratio Mode Unit Conversion: g/oz I Net Weight: 310g I Product
- Dimensions: 130 x 150 x 23.5 mm Box Dimensions: 180 xl60 x55 mm I Weight with Packaging: 510g
- Weighing Range: Max 3kg, Min 0.4g I Accuracy: 0.lg
- Deviation:0 – l000g: ±0.5g-1000 -2000g: ±lg-2000 -3000g: ±l.5g
- Material: ABS, Silicone I Package Contents: Electronic Scale, Silicone Pad, Diatomaceous Earth Pad, Charging Cable (Type-C), User Manual
- Warranty: 12 months (non-human damage) I Manufacture Date: Refer to label on Scale Application: Cooking, Baking, Beverages, Formulas, Coffee
- Note: This product is not intended for commercial transactions.
Customer Support for Usage Issues:
Charging Instructions:
- If the scale is not used for an extended period, charge it regularly to maintain battery life.
- Usage Precautions: The electronic scale is not waterproof. Do not wash and keep the charging port dry. Maximum Weight: The scale supports a maximum load of 3000g. Do not exceed this limit to avoid damage.
- Stability: Ensure that all four feet are in full contact with the surface for accurate measurements. Handling: The electronic scale contains precision parts. Avoid impact and collisions.
- Caution: This product includes a 12-month limited hardware warranty for non-human damage.
In the event of natural manufacturing defects (non-human factors), the company provides free maintenance services.
Charging Precaution:
Do not use Quick Charger to avoid affecting battery performance.
Battery life may vary based on usage patterns and time. Avoid using the device while charging.
Accessory Maintenance:
The silicone pad and diatomaceous earth pad are considered consumables and are not covered under warranty. For cleaning. use a soft cloth to wipe off dirt. This comprehensive product specification and guideline are intended to ensure the proper use and maintenance of your Matrix M2 Pro Al coffee scale.
For damages caused by human factors, the free warranty does not apply. Regardless of the warranty period, if repairs are needed, please provide the following items:
- Product with complete packaging
- Product warranty card or proof of purchase
- All included accessories and promotional items
- https://matrixscale.co/
- matrixscale
- Matrix-tw
- Support@matrixscale.co
Simplify Brew I Amplify Taste
Documents / Resources
 |
matrix Matrix_M2PRO Hand Drip LED Four Display Flow Rate Coffee Scale [pdf] Instructions Matrix_M2PRO Hand Drip LED Four Display Flow Rate Coffee Scale, Matrix_M2PRO, Hand Drip LED Four Display Flow Rate Coffee Scale, LED Four Display Flow Rate Coffee Scale, Display Flow Rate Coffee Scale, Flow Rate Coffee Scale, Rate Coffee Scale, Coffee Scale, Scale |