MARS GAMING ML-VISIONPRO240W Processor All-in-One Liquid Cooler

Specifications

• 275x120x27mm
  • 12VDC / O.15A
• 70x70x62mm
  • 1 2V DC / 0.45A
• 11460

WHAT’S IN THE BOX

Intel/AMD

Intel

Installation options

LCD Screen Connection

• The LCD has a magnetic base that can be attached to the flat metal surfaces of the computer case.
• A. USB Cable Connection: Use this connection if you want to install the screen on the outside of the computer case. Connect the USB cable to a rear or front USB port.
• B. USB Cable Connection to Motherboard: Use this connection if you want to install the screen inside the case. Connect the 9-pin USB cable to the motherboard.

Lighting

• A. Automatic ARGB Lighting Mode
• B. Lighting Mode with ARGB Control
• Note: Ensure that the motherboard or controller is compatible with 3-pin +5V ARGB lighting. Make sure the ARGB connector of the liquid cooling system is connected to the correct ARGB control device port; otherwise, the components could be damaged.
• If you are unsure about the compatibility of your motherboard or controller with ARGB lighting, please contact us for assistance.

Control Software

• Once the liquid cooling system is installed, turn on your computer and download the software from www.marsgaming.eu to customise the screen.

Recommendations and Safety Reminders

• Keep children away from the equipment parts while installing the computer.
• Unplug the computer’s power cable before installation.
• Protect your hands and fingers when handling and installing components.
• Make sure the processor socket is compatible with the heatsink.
• Remove the protective sticker from the heatsink block.
• Apply thermal paste to the processor. Excessive thermal paste can worsen heat dissipation.
• Tighten the mounting screws gently to the stop; do not apply excessive force.
• It is recommended that the equipment include fans to bring fresh air into the system to maintain the processor and other components at optimal temperatures.
• Keep the computer in a clean and dry environment; dust and moisture can limit the lifespan of the components.
• Do not modify the wiring or install adapters that are not included in the packaging.
• Do not use screws, washers, or any other hardware not included in the packaging. If you need assistance installing the product, please contact our customer service.
• Important Notice: If you notice any damage or irregularities in the product, do not proceed with installation and contact our customer service immediately. Failure to follow these instructions could result in injury or additional damage.

Troubleshooting

• Excessive noise from the pump or cooling circuit: The cooling circuit and pump may generate noise due to air bubbles inside the circuit, which can occur when the liquid cooling is used for the first time.
• Turn on the system and let the cooling pump run for 30 minutes. If the noise persists, install the radiator and tubes in the orientation and location shown in the diagrams for the best thermal performance and lowest noise.
  1. Figure 1 — Most recommended
  2. Figure 2 — Recommended
  3. Figure 3 — Not recommended
• High processor temperature: Check if the thermal paste IS in good condition; if it is old, clean it and apply a new layer. Verify that the mounting is correct and there is no gap between the processor surface and the heatsink base.
• Ensure that the screws on the motherboard mounting are tightened to the stop without applying excessive force. Check the fan speed (RPM) through the BIOS menu or the monitoring program provided by the motherboard manufacturer.
• If the airflow in the computer is insufficient, add fans to bring fresh air into the system.
• Fan not spinning: Ensure that no object is blocking the fan blades. Check that the PWM connectors of the fans are connected as shown in the connection diagram.
• Check the fan speed (RPM) through the BIOS menu or the monitoring program provided by the motherboard manufacturer.
• Excessive fan noise: The fan may generate noise if the speed is very high; adjust the fan speed curves in the BIOS to reduce tan speed (RPM) without compromising cooling.
• If the fan has been exposed to dust or dirt, it may have deteriorated; contact us for assistance.
• Software does not detect the screen: Ensure the cooling pump connector is connected to a 9-pin USB port on the motherboard or via the USB cable to an external case port, as shown in the installation diagram.
• If the problem persists, connect the cable to another USB port and reinstall the software.
• Lighting does not turn on: Verify that the lighting works through connection mode A (automatic ARGB lighting).
• ARGB control lighting does not work: Verify that the lighting is connected through connection mode B (ARGB control lighting).
• Connection with ARGB motherboard — Verify that the ARGB connector of the product is connected to a 3-pin +5V ARGB connector on the ARGB motherboard.
• Download the ARGB control application from the motherboard manufacturer’s website.
• Connection with ARGB controller — Verify that the ARGB connector of the product is connected to a 3-pin +5V ARGB connector on the ARGB controller.
• Attention: Ensure that the motherboard or controller is compatible with 3-pin +5V ARGB lighting and that the ARGB connector of the cooler is connected to the correct port; otherwise, the components could be damaged.

Warranty

• Your original purchase receipt will be required to use the warranty service. Keep it in a safe place. Device tampering, technical modifications of any kind, and damage due to external mechanical forces will void your warranty.
• To read the warranty terms and conditions, Visit es.marsgaming.eu/es/terms

Compliance

• You can consult the European Union Declaration of Conformity for this product at www.marsgaming.eu-/en/conformity
• For more information, visit www.marsgaming.eu

Disposal and Recycling

• At the end of the product’s lifespan, it must not be disposed of with regular household waste.
• To promote environmental sustainability and ensure proper waste management, take the product to a designated collection and recycling centre.

Contact

• If you have questions or problems with the product, do not hesitate to contact us: attcliente@biomag.es/+34945124598

Intel 1851/1700/1366/ 1200/115X

Intel 2066/2011/2011-3

AMD

PUMP CONNECTION

CONNECTION

• MARSGAMING
• Biomag S. L.
• EU office:
• Address: Barratxi 39, Pab. 3
• 01013, Vitoria, SPAIN
• Telephone: +34945124598
• Email: attcliente@biomag.es

Documents / Resources

MARS GAMING ML-VISIONPRO240W Processor All in One Liquid Cooler [pdf] User Manual MLVISIONPRO240W, ML-VISIONPRO240W Processor All in One Liquid Cooler, ML-VISIONPRO240W, Processor All in One Liquid Cooler, All in One Liquid Cooler, Liquid Cooler, Cooler

References

• User Manual