Lumberg 2542 03 Modular Plug
Specifications
- Part 1: 5.5-8.5mm
- Network Cable Length: 1.2 inches
- Manufacturer: Lumberg
- Website: www.lumberg.com
- Expiration Date: 08/2024
Product accessories
- lnsert the network cable into the nut from the end
- Peel off the cover of the 1.2 inch network cable
- Fold back braid and drain wire
- Wrap a layer of copper foil
- Fan out all four twisted pairs, following the color coding label and allocate each conductor into proper slots on wiring cap.Trim the ends of conductors.
- Tear Off exces s st ickers abng the dotted line. Place Wiring cap on plug. Place the Wiring cap onto plug, use plier to clamp Wiring cap until it completely snaps-in to effect the connection.
- Close the plug cover, make sure the power cord makes proper contact With the ground dip on the plug, and tighten the nut.
- Close the plug cover, make sure the power cord makes proper contact With the ground clip on the plug, then close 90 degree extending sleeve and tighten the nut.
Step 1: Prepare the Network Cable
- Insert the network cable into the nut from the end.
- Peel off the cover of the 1.2 inch network cable.
Step 2: Cable Preparation
- Fold back braid and drain wire.
- Wrap a layer of copper foil around the cable.
Step 3: Wiring Cap Installation
- Fan out all four twisted pairs following the color coding label.
- Allocate each conductor into proper slots on the wiring cap.
- Trim the ends of conductors.
- Tear off excess stickers along the dotted line.
- Place the wiring cap onto the plug.
- Use pliers to clamp the wiring cap until it completely snaps in to effect the connection.
Step 4: Final Assembly
- Close the plug cover.
- Ensure the power cord makes proper contact with the ground clip on the plug.
- If using the 90-degree extension sleeve, close it and tighten the nut.
FAQs
Q: How do I ensure a secure connection when assembling the plug?
A: Use pliers to firmly clamp the wiring cap until it completely snaps in, ensuring a secure connection.
Q: What is the purpose of the copper foil paper in the cable preparation process?
A: The copper foil paper helps shield the cable from electromagnetic interference, ensuring better signal quality.
Q: Do I need to follow a specific color coding when allocating conductors on the wiring cap?
A: Yes, follow the color coding label provided to ensure correct allocation of conductors for proper functionality.
Documents / Resources
 |
Lumberg 2542 03 Modular Plug [pdf] Instruction Manual 2542 03, 2542 03 Modular Plug, 2542 03, Modular Plug |
